icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
232-542/007-000

DOUBLE PIN HEADER; DIN-35 RAIL M

1915673

TERM BLOCK PCB

232-543/007-000

DOUBLE PIN HEADER; DIN-35 RAIL M

770-7105

LINECT T-CONNECTOR 5-POLE, BLUE

890-930

H-DISTRIBUTION CONNECTOR 5-POLE

ELD301100

CONN TERM BLK CARD EDGE 30POS

ELC361100

CONN TERM BLK CARD EDGE 36POS

232-544/007-000

DOUBLE PIN HEADER; DIN-35 RAIL M

ELD341100

CONN TERM BLK CARD EDGE 34POS

ELB221100

CONN TERM BLK CARD EDGE 22POS

ELI180100

CONN TERM BLK CARD EDGE 18POS

ELD321100

CONN TERM BLK CARD EDGE 32POS

ELH301100

CONN TERM BLK CARD EDGE 30POS

ELB241100

CONN TERM BLK CARD EDGE 24POS

ELE282110

CONN TERM BLK CARD EDGE 28POS

1915754

TERM BLOCK PLUG 12POS STR 3.5MM

ELD361100

CONN TERM BLK CARD EDGE 36POS

ELH152100

CONN TERM BLK CARD EDGE 15POS

ELH251100

CONN TERM BLK CARD EDGE 25POS

ELB281100

CONN TERM BLK CARD EDGE 28POS

2904889

FLKM 10-PA-ROC800

1898363

TERM BLOCK PLUG 12POS STR 5MM

ELB301100

CONN TERM BLK CARD EDGE 30POS

ELH222100

CONN TERM BLK CARD EDGE 22POS

About Terminal Block Adapters

The Terminal Block Adapters range covers wire connections organised in compatible terminal-block systems.

Compare wire range, pitch, mounting, jumper system and electrical ratings for the required installation. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Review wire range, pitch, mounting, jumper system and electrical ratings on the individual product page before choosing a part.

Terminal Block Adapters

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Control cabinets

Control cabinets

Terminal Block Adapters can be evaluated for control cabinets. Match wire range, pitch, mounting, jumper system and electrical ratings to the equipment interface.

Equipment wiring

Equipment wiring

For equipment wiring, verify wire range, pitch, mounting, jumper system and electrical ratings on the selected Terminal Block Adapters. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Interface assemblies

Interface assemblies

In interface assemblies, allow for the required mounting, routing or termination space. Check wire range, pitch, mounting, jumper system and electrical ratings before assembly.

Terminal Block Adapters inspection

Terminal Block Adapters inspection

For terminal block adapters inspection, identify the original Terminal Block Adapters part number and mating arrangement. Compare wire range, pitch, mounting, jumper system and electrical ratings before substitution.

1239.3 configuration vs. 1233.3 configuration

Compare the interfaces, construction and selection details of these two product options.

1239.3 configuration

Example: 1239.3

    1233.3 configuration

    Example: 1233.3

      The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

      Frequently Asked Questions

      Practical answers to help you prepare your drawing and specifications.

      What does Terminal Block Adapters include?

      This category covers wire connections organised in compatible terminal-block systems. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

      Match the selected Terminal Block Adapters to the required wire range, pitch, mounting, jumper system and electrical ratings.

      For Terminal Block Adapters, check wire range, pitch, mounting, jumper system and electrical ratings against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

      Check wire range, pitch, mounting, jumper system and electrical ratings for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

      Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion. For Terminal Block Adapters, identify the matching system and required assembly parts before ordering.

      1239.3 specifies the part drawing. 1233.3 specifies the part drawing. Check the full mating and installation requirements before treating different Terminal Block Adapters as replacements.

      Send the manufacturer and full part number, quantity and required delivery destination. For this category, include wire range, pitch, mounting, jumper system and electrical ratings and a mating or installation drawing when a replacement is needed.

      Tell us what you need to build

      Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

      • Engineering review within 24 hours
      • NDA available before drawings are shared
      • Free samples in 5-7 days after drawing approval
      Inquiry Drawer

      Review & Submit Request

      This site uses cookies

      We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details