Harness terminations
Terminals - Housings, Boots can be evaluated for harness terminations. Match termination style, conductor size, mating dimensions and insulation to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 172615-2 | CONN RCPT HSG 0.312 3POS BLACK |
| 1969232-4 | CONN RCPT HSG 0.25 2POS GREEN |
| 1-480418-0 | CONN RCPT HSG 0.205 1POS NATURAL |
| 1-480298-0 | CONN RCPT HSG 0.25 1POS NATURAL |
| 172469-8 | CONN RCPT HSG 0.25 1POS BLACK |
| 176498-2 | CONN RCPT HSG 0.187 2POS BLACK |
| 1-1241968-5 | CONN MALE TAB HSG 0.25 10POS NAT |
| 927422-4 | CONN RCPT HSG 0.25 3POS YELLOW |
| 172074-5 | CONN RCPT HSG 0.187 1POS GREEN |
| 170802-3 | CONN MALE TAB HSG 0.11 6POS CLR |
| 1-174712-1 | CONN RCPT HSG 0.187 2POS NATURAL |
| 368602-1 | CONN RCPT HSG 0.187 1POS NATURAL |
| 1-144835-3 | CONN RCPT HSG 0.197 3POS BROWN |
| 1743102-1 | CONN RCPT HSG 0.187 2POS NATURAL |
| 178004-5 | CONN RCPT HOUSING 0.25 4POS BLUE |
| 172076-4 | CONN RCPT HSG 0.25 1POS YELLOW |
| 1-171432-2 | CONN RCPT HOUSING 0.25 6POS RED |
| 284699-1 | CONN RCPT HSG 0.25 5POS NATURAL |
| 1-174587-1 | CONN RCPT HSG 0.187 2POS NATURAL |
| 1-180984-2 | CONN RCPT BOOT 0.25 1POS BLACK |
| 1-176497-1 | CONN RCPT HSG 0.25 1POS NATURAL |
| 626240-2 | CONN RCPT HSG 0.25 5POS BLACK |
| 1-170823-9 | CONN RCPT SLEEVE 0.25 1POS CLEAR |
| 3-171848-1 | CONN RCPT HSG 0.25 6POS GREEN |
The Terminals - Housings, Boots range covers the specified individual wire termination and connector components.
Compare termination style, conductor size, mating dimensions and insulation for the required installation. These are connector housings. Verify whether contacts are supplied separately and match the specified contact series and retention features.
Review Style, Terminal Type, Gender, Terminal Size and Number of Positions on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Terminals - Housings, Boots can be evaluated for harness terminations. Match termination style, conductor size, mating dimensions and insulation to the equipment interface.
For panel wiring, verify Style, Terminal Type, Gender, Terminal Size and Number of Positions on the selected Terminals - Housings, Boots. These are connector housings. Verify whether contacts are supplied separately and match the specified contact series and retention features.
In termination verification, allow for the required mounting, routing or termination space. Check termination style, conductor size, mating dimensions and insulation before assembly.
For terminals - housings, boots inspection, identify the original Terminals - Housings, Boots part number and mating arrangement. Compare Style, Terminal Type, Gender, Terminal Size and Number of Positions before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 4471
Example: 224230
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers the specified individual wire termination and connector components. These are connector housings. Verify whether contacts are supplied separately and match the specified contact series and retention features.
Examples in this category include Quick Connect, Disconnect and Barrel. Match the selected Terminals - Housings, Boots to the required termination style, conductor size, mating dimensions and insulation.
For Terminals - Housings, Boots, check Style, Terminal Type, Gender, Terminal Size and Number of Positions against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check termination style, conductor size, mating dimensions and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
These are connector housings. Verify whether contacts are supplied separately and match the specified contact series and retention features. For Terminals - Housings, Boots, identify the matching system and required assembly parts before ordering.
4471 specifies Style: Boot and Terminal Type: Quick Connect, Disconnect. 224230 specifies Style: Sleeve and Terminal Type: Barrel. Check the full mating and installation requirements before treating different Terminals - Housings, Boots as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include termination style, conductor size, mating dimensions and insulation and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details