Control wiring
Wire Pin Connectors can be evaluated for control wiring. Match wire gauge, pin dimensions, barrel geometry and insulation to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 192120009 | WP-2218X MC100 (100/BAG) (192120 |
| 192110008 | WP-1218 MC100 (100/BAG) (1921100 |
| 19211-0002 | WIRE PIN KRIMPTITE TAPED (WP-121 |
| EV10-P55K-QYY | STRONGHOLD PIN TERMINAL VINYL |
| 19212-0002 | WIRE PIN INSULKRIMP TAPED (WP-22 |
| MVU18-47PX-A-BOTTLE | CONN WIRE PIN 18-22AWG 100PC |
| PMV1-P12B-3K | CONN WIRE PIN TERM 18-20AWG |
| 19213-0012 | WIRE PIN AVIKRIMP TAPED (WP-8614 |
| 192130020 | WP-5218 PA25 (25/BAG) (192130020 |
| EV10-P55-QYY | STRONGHOLD PIN TERMINAL VINYL |
| 192130022 | WP-5210 MC25 (25/BAG) |
| PV10-P55-DYY | CONN WIRE PIN TERM 10-12AWG |
| 555201-000 | CONN WIRE PIN TERM 18-22AWG |
| 3240064 | CONN WIRE PIN TERM 16-20AWG |
| 150730 | CONN TERM RECT WIRE 16-22 AWG |
| 76-IPT12 | PVC INS PIN TERM 12-10AWG |
| 3240068 | CONN WIRE PIN TERM 10-12AWG |
| 9200480000 | CONN WIRE PIN TERM 1=100 |
| 3241217 | PIN CABLE LUG YELLOW 4 - 6 MM L |
| 34294 | CONN TERM RECT TONG 16-22 AWG |
| 192130007 | CONN WIRE PIN TERM 10-12AWG |
| 192130010 | CONN WIRE PIN TERM 18-22AWG |
| 76-IPT16L | PVC INS PIN TERM 16-14AWG 50 BAG |
| 76-IPT12L | PVC INS PIN TERM 12-10AWG 50 BAG |
The Wire Pin Connectors range covers individual crimp pin terminations for the specified wire range.
Compare wire gauge, pin dimensions, barrel geometry and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.
Review Length - Overall, Wire Gauge, Insulation, Termination and Color on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Wire Pin Connectors can be evaluated for control wiring. Match wire gauge, pin dimensions, barrel geometry and insulation to the equipment interface.
For harness preparation, verify Length - Overall, Wire Gauge, Insulation, Termination and Color on the selected Wire Pin Connectors. Use the exact mating part and installation dimensions specified for the selected item.
In crimp inspection, allow for the required mounting, routing or termination space. Check wire gauge, pin dimensions, barrel geometry and insulation before assembly.
For wire pin connectors inspection, identify the original Wire Pin Connectors part number and mating arrangement. Compare Length - Overall, Wire Gauge, Insulation, Termination and Color before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 710/07
Example: 710/10
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers individual crimp pin terminations for the specified wire range. Use the exact mating part and installation dimensions specified for the selected item.
Examples in this category include 20 AWG, 18 AWG and 10 AWG. Match the selected Wire Pin Connectors to the required wire gauge, pin dimensions, barrel geometry and insulation.
For Wire Pin Connectors, check Length - Overall, Wire Gauge, Insulation, Termination and Color against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check wire gauge, pin dimensions, barrel geometry and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
Use the exact mating part and installation dimensions specified for the selected item. For Wire Pin Connectors, identify the matching system and required assembly parts before ordering.
710/07 specifies Length - Overall: 0.354" (9.00mm) and Wire Gauge: 20 AWG. 710/10 specifies Length - Overall: 0.354" (9.00mm) and Wire Gauge: 18 AWG. Check the full mating and installation requirements before treating different Wire Pin Connectors as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include wire gauge, pin dimensions, barrel geometry and insulation and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details