Harness junctions
Wire Splice Connectors can be evaluated for harness junctions. Match wire range, conductor count, splice method and insulation to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| H-31-BOX | CONN WIRE CAP 14-22 AWG TWIST ON |
| 192030165 | CONN INLINE 18-22 AWG CRIMP |
| 191640014 | CONN SPLICE 18-22 AWG CRIMP |
| HE2C | CONN SPLICE BLU 22-14 AWG 300V |
| 53088 | CONN SPLICE 400MCM CRIMP AMPOWER |
| D-436-83CS2705 | CONN SPLICE 16-20 AWG CRIMP |
| EQSP14D-Q | STRONGHOLD QUICK SPLICE, 18 - 14 |
| 148-90003 | CONN INLINE TAP 12-22 AWG |
| 357605200 | CONN SPLICE CRIMP 35760 |
| 192050004 | CONN INLINE 8 AWG CRIMP |
| SCMSX25-L | CONN BUTT SPLICE 25MM CRIMP |
| 2213920-2 | COOLSPLICE NS SEALED 1 POLE 16/1 |
| 52563 | CONN SPLICE 500-600AL/400CU MCM |
| 2-55825-1 | CONN SPLICE 14-16 AWG CRIMP |
| 63-SP | CONN SPLICE 10-12 AWG CRIMP |
| 192160002 | CONN INLINE TAP 10-12 AWG IDC |
| 191540022 | CONN SPLICE 14-16 TO 18-22 AWG |
| 192040023 | CONN 4 WAY SPLICE CRIMP |
| TCSS-2/0-U | COMPRESSION CONNECTORS |
| KS2,5 | butt splice 2.5 mm2 / 16-14 AWG |
| ESV14BXK-Q | STRONGHOLD BUTT SPLICE, VINYL IN |
| 40056 | 3M SCOTCHLOK ALUMINUM ONE HOLE L |
| QL2-A-4/0-600 | 3M MECHANICAL SHEARBOLT TWO-HOLE |
| CI-1/0 | ALUMINUM CONNECTOR 1/0AWG |
The Wire Splice Connectors range covers connections joining compatible wire conductors.
Compare wire range, conductor count, splice method and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.
Review Terminal Type, Number of Wire Entries, Termination, Wire Gauge and Insulation on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Wire Splice Connectors can be evaluated for harness junctions. Match wire range, conductor count, splice method and insulation to the equipment interface.
For equipment wiring, verify Terminal Type, Number of Wire Entries, Termination, Wire Gauge and Insulation on the selected Wire Splice Connectors. Use the exact mating part and installation dimensions specified for the selected item.
In splice verification, allow for the required mounting, routing or termination space. Check wire range, conductor count, splice method and insulation before assembly.
For wire splice connectors inspection, identify the original Wire Splice Connectors part number and mating arrangement. Compare Terminal Type, Number of Wire Entries, Termination, Wire Gauge and Insulation before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 11545
Example: 191540030
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers connections joining compatible wire conductors. Use the exact mating part and installation dimensions specified for the selected item.
Examples in this category include Butt Splice, Inline, Individual Openings, Inline, Individual Openings (Parallel) and Butt Splice, Closed End, Individual Openings. Match the selected Wire Splice Connectors to the required wire range, conductor count, splice method and insulation.
For Wire Splice Connectors, check Terminal Type, Number of Wire Entries, Termination, Wire Gauge and Insulation against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check wire range, conductor count, splice method and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
Use the exact mating part and installation dimensions specified for the selected item. For Wire Splice Connectors, identify the matching system and required assembly parts before ordering.
11545 specifies Terminal Type: Butt Splice, Inline, Individual Openings and Number of Wire Entries: 2. 191540030 specifies Terminal Type: Butt Splice, Inline, Individual Openings and Number of Wire Entries: 2. Check the full mating and installation requirements before treating different Wire Splice Connectors as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include wire range, conductor count, splice method and insulation and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details