Headphone amplifier links
Match the audio plug diameter and stereo contact arrangement to both devices.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 3038 | CONFIGURABLE JUMPER CABLE |
| 770-10055-00200 | RCA CABLE |
| 770-10048-00200 | AUDIO CONNECTION CABLE STEREO |
| 36HR03684 | CABLE 3.5MM MOLDED R/A STERO |
| XLRMFP-15 | 15FT PREMIUM XLR MALE TO FEMALE |
| 3030 | CONFIGURABLE JUMPER CABLE |
| 770-10054-00200 | RCA CABLE |
| XLRMFP-25 | 25FT PREMIUM XLR MALE TO FEMALE |
| TRSP-50 | 50FT PREMIUM 1/4 TRS MALE TO MAL |
| EM632812 | CABLE MOD 12' RCA COM |
| TRSP-25 | 25FT PREMIUM 1/4 TRS MALE TO MAL |
| 05AD05X | CABLE 1/4" MALE-MALE MONO 2FT |
| 608-024-6FT-RH | 3.5MM STEREO PLUG TO PLUG 6FT |
| 4279N-12 | CABLE BANTAM PLUGS 12" NICKEL |
| EMHD120910 | CABLE ASSY 3.5MM JACK 10' |
| 6331-96 | PLUG DUAL BANTAM PATCH CABLE |
| HPACR3 | CABLE RCA MALE/MALE 2M HIPRF RED |
| 10-03228 | CBL ASSEM 4CON 3.5MM R/A M-F 6M |
| HPACG3 | CABLE RCA MALE/MALE 2M HIPRF GRN |
| 10-03231 | CBL ASSEM 4CON 3.5MM F 6M |
| HPAVCC3 | CABLE 3RCA MALE/MALE 2M HI PERF |
| SANOXY-VNDR-25FT-AUDIO | SANOXY 25-FEET 3.5MM STEREO AUDI |
| EM660412 | CABLE ASSY AUDIO VID RCA 12' |
| 101968-10 | ADAPTER CONNECTOR CABLE |
Audio Cable Assemblies includes mono, stereo and four-conductor audio leads, extension cables and patch cords.
When selecting an assembly, check connector diameter, plug or jack arrangement, contact wiring and shielding.
An audio plug can carry different wiring arrangements. A TRS connector does not by itself distinguish balanced mono from unbalanced stereo; consult both devices.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Match the audio plug diameter and stereo contact arrangement to both devices.
Check whether the patch panel requires balanced or unbalanced wiring and the specified plug format.
Confirm the source output and speaker input use compatible analogue audio contacts.
Use the specified channel wiring and shielding; connector fit alone does not establish signal compatibility.
Compare the interfaces, construction and selection details of these two product options.
Representative listed part: CA-2206.
Representative listed part: 770-10040-00100.
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
Compare the Channels attribute with the wiring required by both devices. This family contains different conductor arrangements; a matching plug diameter alone does not establish the required audio or microphone connection.
Check the 1st Connector and 2nd Connector entries independently, including plug or jack, diameter and angle. Choose the arrangement that matches the two equipment ports rather than selecting from the cable name alone.
Review length, shielding, connector angle and intended usage for the exact part. Provide the available clearance around the equipment ports if a straight plug may obstruct installation.
An audio plug can carry different wiring arrangements. A TRS connector does not by itself distinguish balanced mono from unbalanced stereo; consult both devices.
CA-2206 is shown as mono audio cables, with Channels listed as Mono. 770-10040-00100 is shown as trs audio cables, with Channels listed as Stereo (3 Conductor, TRS). These are two examples, not a statement that every part has either specification.
Provide the original manufacturer and complete part number, or a drawing. For this range, compare connector diameter, plug or jack arrangement, contact wiring and shielding. Identify any requirement not covered by the listing rather than selecting only by length or appearance.
Supply a mating-interface drawing and the required connector diameter, plug or jack arrangement, contact wiring and shielding. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details