icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
EM630106

CABLE MOD 6' RCA VID

D1004

1 TO 4 SPLITTER CABLE

EMHD120915

CABLE ASSY 3.5MM JACK 15'

EM630112

CABLE MOD 12' RCA VID

3031QS

HARDWIRED JUMPER CABLE

1700

RIGHT-ANGLE 3.5MM STEREO PLUG TO

3803QS

HARDWIRED JUMPER CABLE

EMHD120906

CABLE ASSY 3.5MM AUDIO M 6'

330F2X

ST40 TO ST35 & ST60

3038QS

HARDWIRED JUMPER CABLE

EM6312

CABLE MOD 6" 1 RCA PL

EM660306

CABLE MOD 6' SVHS VID

LF8BKX

PATCHCORD 1/4" BLACK 8FT

EM6313

CABLE MOD 6" 1 RCA JA

3838QS

HARDWIRED JUMPER CABLE

EM6314

CABLE MOD 6" 1 RCA JA

608-024RR-007

3.5MM STEREO M/M RIGHT ANGLE 7FT

TT107

CABLE ASSY BANTAM MALE 4'

TS10TS

TS PLUG TO TS PLUG

876

STEREO 3.5MM PLUG/PLUG AUDIO CAB

TT166X

PATCHCORD TWIN 3-COND 3.0FT

4069

3.5MM STEREO MALE/MALE CABLES -

TRS05TRS

TRS TO TRS ROHS

HPACB3

CABLE RCA MALE/MALE 2M HIPRF BLU

About Barrel - Audio Cables

Audio Cable Assemblies includes mono, stereo and four-conductor audio leads, extension cables and patch cords.

When selecting an assembly, check connector diameter, plug or jack arrangement, contact wiring and shielding.

An audio plug can carry different wiring arrangements. A TRS connector does not by itself distinguish balanced mono from unbalanced stereo; consult both devices.

Barrel - Audio Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Headphone amplifier links

Headphone amplifier links

Match the audio plug diameter and stereo contact arrangement to both devices.

Studio patch points

Studio patch points

Check whether the patch panel requires balanced or unbalanced wiring and the specified plug format.

Portable audio connections

Portable audio connections

Confirm the source output and speaker input use compatible analogue audio contacts.

Audio test bench

Audio test bench

Use the specified channel wiring and shielding; connector fit alone does not establish signal compatibility.

Mono audio cables vs. TRS audio cables

Compare the interfaces, construction and selection details of these two product options.

Mono audio cables

Representative listed part: CA-2206.

  • 1st Connector Phone Plug, 3.5mm (1/8"), Right Angle
  • 2nd Connector Cable (Round)
  • Channels Mono
  • Shielding Shielded
  • Length 6.0' (1.83m)
  • Usage Headphones

TRS audio cables

Representative listed part: 770-10040-00100.

  • 1st Connector Phone Plug, 3.5mm (1/8")
  • 2nd Connector Phone Plug, 3.5mm (1/8")
  • Channels Stereo (3 Conductor, TRS)
  • Shielding Shielded
  • Length 3.3' (1.00m)
  • Usage Headphones, Patch Cable

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

Should I choose mono, TRS or TRRS audio cable?

Compare the Channels attribute with the wiring required by both devices. This family contains different conductor arrangements; a matching plug diameter alone does not establish the required audio or microphone connection.

Check the 1st Connector and 2nd Connector entries independently, including plug or jack, diameter and angle. Choose the arrangement that matches the two equipment ports rather than selecting from the cable name alone.

Review length, shielding, connector angle and intended usage for the exact part. Provide the available clearance around the equipment ports if a straight plug may obstruct installation.

An audio plug can carry different wiring arrangements. A TRS connector does not by itself distinguish balanced mono from unbalanced stereo; consult both devices.

CA-2206 is shown as mono audio cables, with Channels listed as Mono. 770-10040-00100 is shown as trs audio cables, with Channels listed as Stereo (3 Conductor, TRS). These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare connector diameter, plug or jack arrangement, contact wiring and shielding. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required connector diameter, plug or jack arrangement, contact wiring and shielding. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details