icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
CA-2218

CABLE ASSY 5.5X2.5MM M/F R/A 3'

10-02245

CBL ASSEM STR JACK 2.5MM 18AWG

10-01782

CBL ASSY 2.1MM M-F 6' 18AWG

10-02565

CBL ASSY 2.1MM JACK-JACK FLAT 3'

10-02737

SPLITTER 5.5X2.1MM F TO X2 M

10-01077

CBL ASSY M R/A-F 2.5MM 3' 18AWG

10-01553

CABLE ASSY R/A 2.1MM 6' 18 AWG

172-1018

PLUG DC MOLD 22 AWG RA 2.5MM 10'

172-4207

PLUG DC MOLDED 18AWG RA 2.1MM 2'

CA-2224

CABLE ASSY STR 3.0MM 6' 18AWG

10-02728

SPLITTER 5.5X2.5MM M TO X2 F

10-02239

CBL ASSEM 1.35MM M-F 24AWG

10-01777

CBL ASSY STR JACK 2.5MM 6' 18AWG

10-03926

CBL R/A 2.5MM PLUG TO PLUG 3'

10-02321

CBL ASSY 2.5MM PLUG-CBL FLAT 6'

172-4202

PLUG DC MOLDED 18AWG 2.5MM 2'

10-02747

SPLITTER 5.5X2.1MM F TO X3 F

10-01068

CBL ASSY M-F 2.1MM 3' 18 AWG

10-02789

SPLITTER 3.5X1.35MM M TO X3 F

10-01073

CBL ASSY M-F 2.5MM 3' 18 AWG

10-02770

SPLITTER 5.5X2.5MM F TO X2 F

10-03924

CBL R/A 2.1MM PLUG TO PLUG 3'

10-02512

CBL ASSY F 6.5X3MM 6' 24AWG

10-03867

JACK PNL MNT 3.5X1.1MM W/LEADS

About Barrel - Power Cables

DC Barrel Power Cables includes DC barrel-plug leads, extensions and cable terminations.

When selecting an assembly, check inner and outer plug diameter, polarity, wire size and required current.

Matching the outside barrel diameter does not establish the centre-pin size or polarity. These are separate checks against the adapter and device.

Barrel - Power Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

DC adapter connections

DC adapter connections

Match the inner and outer barrel dimensions, polarity and complete cable current rating.

Benchtop instrument power

Benchtop instrument power

Check the required voltage and polarity before connecting a replacement lead.

LED controller supply

LED controller supply

Confirm the controller inlet dimensions and load current; do not infer ratings from connector appearance.

Inspection camera power

Inspection camera power

Check the camera supply specification and cable routing before selecting a power lead.

Straight barrel-plug leads vs. Right-angle barrel-plug leads

Compare the interfaces, construction and selection details of these two product options.

Straight barrel-plug leads

Representative listed part: 10-01239.

  • Connector Type 2.5mm ID, 5.5mm OD
  • Style Plug to Wire Leads
  • Cable Type Flat
  • Shielding Unshielded
  • Length 6.0' (1.83m)

Right-angle barrel-plug leads

Representative listed part: 10-03916.

  • Connector Type 2.1mm ID, 5.5mm OD
  • Style Plug, Right Angle to Wire Leads
  • Cable Type Round
  • Shielding Shielded
  • Length 3.00' (915.00mm)

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

Are 5.5 mm barrel power plugs all the same?

Check both the inner and outer diameters in Connector Type. The source data includes 2.1 mm and 2.5 mm inner-diameter variants with a 5.5 mm outer diameter, so the outer diameter alone is insufficient for selection.

Use the equipment or adapter specification to confirm polarity and electrical requirements. Do not infer them from connector dimensions or wire colours; request confirmation if the product attributes do not state them.

Compare the Style entry and the clearance around the equipment inlet. Also check whether the far end is another connector or wire leads, since these need different installation arrangements.

Matching the outside barrel diameter does not establish the centre-pin size or polarity. These are separate checks against the adapter and device.

10-01239 is shown as straight barrel-plug leads, with Style listed as Plug to Wire Leads. 10-03916 is shown as right-angle barrel-plug leads, with Style listed as Plug, Right Angle to Wire Leads. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare inner and outer plug diameter, polarity, wire size and required current. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required inner and outer plug diameter, polarity, wire size and required current. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details