icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
A7VVB-1510M

CABLE D-SUB-AMU15B/AE15M/AMU15B

M7VVK-1510R

D-SUB CABLE MMU15K/MC16M/MMU15K

BB-232NM9MF25

CABLE ASSY DB09 UNSHLD 7.62M

A7PSB-2506M

CABLE D-SUB-AMM25B/AE25M/AFM25B

M7NNK-2506R

D-SUB CABLE MML25K/MC26M/MML25K

C7SSG-3706M

DSUB CABLE - CFM37G/AE37M/CFM37G

A7OXB-3706M

CABLE D-SUB - AFN37B/AE37M/X

A7MMB-2506G

CABLE D-SUB-AMP25B/AE25G/AMP25B

A7WWB-1510G

CABLE D-SUB-AFU15B/AE15G/AFU15B

A7MFB-2506M

CABLE D-SUB-AMP25B/AE25M/AFP25B

A7NXB-2510M

CABLE D-SUB - AMN25B/AE25M/X

A7PSB-2510G

CABLE D-SUB-AMM25B/AE25G/AFM25B

SDB-25AFFM-SL7A02

CABLE ASSY DB25 SHLD BLACK 2M

A7FXB-3710M

CABLE D-SUB - AFP37B/AE37M/X

A7OOB-2506G

CABLE D-SUB-AFN25B/AE25G/AFN25B

C7SSG-3710G

DSUB CABLE - CFM37G/AE37G/CFM37G

HDB-26AMMM-SL7A02

CABLE ASSY HD26 SHLD BLACK 2M

A7WWB-1506G

CABLE D-SUB-AFU15B/AE15G/AFU15B

C7PPG-3706M

DSUB CABLE - CMM37G/AE37M/CMM37G

M7WXK-2510R

D-SUB CABLE - MFU25K/MC26M/X

A7FFB-2510G

CABLE D-SUB-AFP25B/AE25G/AFP25B

HDB-15AMMM-SL7A05

CABLE ASSY HD15 SHLD BLACK 5M

C7SSG-2510M

DSUB CABLE - CFM25G/AE25M/CFM25G

A7SSB-1510M

CABLE D-SUB-AFM15B/AE15M/AFM15B

About D-Sub Cables

D-Sub Cable Assemblies includes D-sub interconnects with different contact counts and end configurations.

When selecting an assembly, check contact count, gender, pinout, mounting hardware and cable shielding.

Straight-through, crossover and equipment-specific D-sub cables may use similar shells. Confirm the pin-to-pin map instead of inferring it from the connector size.

D-Sub Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Serial controller links

Serial controller links

Confirm the serial standard and pinout; a D-sub shell does not identify the electrical interface.

Instrument rear-panel wiring

Instrument rear-panel wiring

Check contact count, gender and screw-lock hardware against the instrument drawing.

Legacy workstation servicing

Legacy workstation servicing

Distinguish straight-through, crossover and equipment-specific wiring before replacement.

Panel extension routing

Panel extension routing

Match both ends and allow clearance for the backshell, mounting screws and cable bend.

Male D-sub termination vs. Female D-sub termination

Compare the interfaces, construction and selection details of these two product options.

Male D-sub termination

Representative listed part: 1200980207.

  • 1st Connector Plug, Male Pins
  • 2nd Connector Plug, Male Pins (2), Right Angle
  • Type DB9
  • Number of Positions 9
  • Shielding Shielded
  • Length 3.28' (1.00m)

Female D-sub termination

Representative listed part: M7OOK-0906J.

  • 1st Connector Receptacle, Female Sockets
  • 2nd Connector Receptacle, Female Sockets
  • Type DB9
  • Number of Positions 9
  • Shielding Unshielded
  • Length 6.00' (1.83m)

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

Are D-sub cables with the same pin count wired identically?

Check both mating ends and obtain the pin-to-pin wiring required by the equipment. Position count identifies only part of the connection; it does not document straight-through wiring, crossovers or unused contacts.

Read the contact description at both ends and compare it with the equipment connector. Specify the shell size, position count and retention arrangement as well as male pins or female sockets.

Confirm the lead identification, length and termination requirements for the installation. A connector-to-leads assembly requires a defined wiring plan rather than the same mating arrangement as a fully terminated cable.

Straight-through, crossover and equipment-specific D-sub cables may use similar shells. Confirm the pin-to-pin map instead of inferring it from the connector size.

1200980207 is shown as male d-sub termination, with 1st Connector listed as Plug, Male Pins. M7OOK-0906J is shown as female d-sub termination, with 1st Connector listed as Receptacle, Female Sockets. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare contact count, gender, pinout, mounting hardware and cable shielding. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required contact count, gender, pinout, mounting hardware and cable shielding. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details