icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
263-OFC04-3BC12

OF PL-EP LC DXUNI OM3 09 12X

263-OFC04-3BZ12

OF PL-EP LC DXUNI SMUPC 09 12X

263-OFC04-2BZ06

OF PL-EP LC DXSTD SMUPC 09 6X

263-OFC04-2BY12

OF PL-EP LC DXSTD SMAPC 09 12X

263-OFC04-1BY12

OF PL-EP LC SX SMAPC 09 12X

263-OFC04-3BD06

OF PL-EP LC DXUNI OM4 09 6X

263-OFC04-1BZ12

OF PL-EP LC SX SMUPC 09 12X

263-OFC04-2BC06

OF PL-EP LC DXSTD OM3 09 6X

106066-0000

SCD CONN (MMPC+ZR) 3MM BEIGE

263-OFC04-3BY06

OF PL-EP LC DXUNI SMAPC 09 6X

106032-7200

SC TUNABLE CONNECTOR

263-OFC04-1BD06

OF PL-EP LC SX OM4 09 6X

106032-3900

CONN SC TUNABLE 2.0MM BLUE (MM12

263-OFC04-3BZ01

OF PL-EP LC DXUNI SMUPC 09 1X

1411052

CONN FIBER LC PLUG DUPLEX 125UM

MPOFTV70ZNN

MPO FIELD

263-OFC04-2BY01

OF PL-EP LC DXSTD SMAPC 09 1X

AOT4531-2

TERMINI, LUMIERE LONG BOOT,

FLCDMC6EIY

PRE-POLISHED LC DUPLEX OPTICAM S

MPOFTV20GN

MPO FIELD

AOT4531-5

TERMINI, LUMIERE W/O BOOT

AOT4531-11

LUMIERE TERMINI, SHORT BOOT,

1060630000

CONN FIBER SC PLUG SMPLX 127UM

1411297

CONN FIBER SC PLUG SIMPLEX 125UM

About Fiber Optic Connector Assemblies

The Fiber Optic Connector Assemblies range covers connector interfaces for fibre-optic signal paths.

Compare connector format, fibre type, polish and alignment for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Connector Style, Connector Type, Simplex/Duplex, Mode and Fiber Cladding Diameter on the individual product page before choosing a part.

Fiber Optic Connector Assemblies

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Optical network equipment

Optical network equipment

Fiber Optic Connector Assemblies can be evaluated for optical network equipment. Match connector format, fibre type, polish and alignment to the equipment interface.

Patch-panel interfaces

Patch-panel interfaces

For patch-panel interfaces, verify Connector Style, Connector Type, Simplex/Duplex, Mode and Fiber Cladding Diameter on the selected Fiber Optic Connector Assemblies. Use the exact mating part and installation dimensions specified for the selected item.

Optical verification

Optical verification

In optical verification, allow for the required mounting, routing or termination space. Check connector format, fibre type, polish and alignment before assembly.

Fiber Optic Connector Assemblies inspection

Fiber Optic Connector Assemblies inspection

For fiber optic connector assemblies inspection, identify the original Fiber Optic Connector Assemblies part number and mating arrangement. Compare Connector Style, Connector Type, Simplex/Duplex, Mode and Fiber Cladding Diameter before substitution.

1063871550 configuration vs. 1063972402 configuration

Compare the interfaces, construction and selection details of these two product options.

1063871550 configuration

Example: 1063871550

    1063972402 configuration

    Example: 1063972402

    • Connector Style LC
    • Connector Type Plug
    • Simplex/Duplex Duplex
    • Mode Multimode
    • Fiber Cladding Diameter 127µm
    • Cable Diameter 0.9mm
    • Mounting Type Free Hanging (In-Line)

    The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

    Frequently Asked Questions

    Practical answers to help you prepare your drawing and specifications.

    What does Fiber Optic Connector Assemblies include?

    This category covers connector interfaces for fibre-optic signal paths. Use the exact mating part and installation dimensions specified for the selected item.

    Examples in this category include LC, FC and SC. Match the selected Fiber Optic Connector Assemblies to the required connector format, fibre type, polish and alignment.

    For Fiber Optic Connector Assemblies, check Connector Style, Connector Type, Simplex/Duplex, Mode and Fiber Cladding Diameter against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

    Check connector format, fibre type, polish and alignment for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

    Use the exact mating part and installation dimensions specified for the selected item. For Fiber Optic Connector Assemblies, identify the matching system and required assembly parts before ordering.

    1063871550 specifies the part drawing. 1063972402 specifies Connector Style: LC and Connector Type: Plug. Check the full mating and installation requirements before treating different Fiber Optic Connector Assemblies as replacements.

    Send the manufacturer and full part number, quantity and required delivery destination. For this category, include connector format, fibre type, polish and alignment and a mating or installation drawing when a replacement is needed.

    Tell us what you need to build

    Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

    • Engineering review within 24 hours
    • NDA available before drawings are shared
    • Free samples in 5-7 days after drawing approval
    Inquiry Drawer

    Review & Submit Request

    This site uses cookies

    We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details