Optical network equipment
Fiber Optic Connector Assemblies can be evaluated for optical network equipment. Match connector format, fibre type, polish and alignment to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| AX105007-B25 | MPO KEY-UP KEY-DOWN, SX, 25/PK |
| PXEB5400MM4550 | CONN PLUG 4CH OM1/OM3 4.5-5MM |
| AX105224-B25 | FX BR U LC KEYED AQ OM1 25/PK |
| 2313070 | CONN FIBER OPTIC |
| AX105207-B25 | FX BR UNIVERSAL SC OM3-4 25/PK |
| PXEB5200MM4550 | CONN PLUG 2CHAN OM1/3 4.5-5MM |
| PXEB5420MM4550 | CONN FMBH 4CH OM1/OM3 4.5-5MM |
| PXEB5200MM5560 | CONN PLUG 2CHAN OM1/3 5.5-6MM |
| PXEB5220MM5560 | CONN FMBH 2CH OM1/OM3 5.5-6MM |
| PXEB5410MM4045 | CONN JNBH 4CH OM1/OM3 4-4.5MM |
| 1411291 | CONN FIBER SCRJ PLUG DUPLX 125UM |
| MF11BMT-WRBHB02 | CONN FBR OPTIC |
| 1063722500 | DUPLEX LC2+ SEALED CONN 127UM MM |
| PXEB5210MM4550 | CONN JNBH 2CH OM1/OM3 4.5-5MM |
| PXEB5200MM4045 | CONN PLUG 2CHAN OM1/3 4-4.5MM |
| 1608045 | CONN FIBER OPTIC |
| AX105202-B25 | FX BR UNIVERSAL LC OM3-4 25/PK |
| 2313779 | CONN FIBER SC PLUG DUPLEX |
| AX103037 | FXM MOD 12F MM LC KEY BR |
| 1060463000 | CONN FIBER LC PLUG DUPLEX 127UM |
| PXEB5220MM4045 | CONN FMBH 2CH OM1/OM3 4-4.5MM |
| MF11BMT-WP5CHA02 | CONN FBR OPTIC |
| 2313546 | CONN FIBER SCRJ PLUG DUPLEX |
| 2313782 | CONN FIBER ST PLUG SIMPLEX |
The Fiber Optic Connector Assemblies range covers connector interfaces for fibre-optic signal paths.
Compare connector format, fibre type, polish and alignment for the required installation. Use the exact mating part and installation dimensions specified for the selected item.
Review Connector Style, Connector Type, Simplex/Duplex, Mode and Fiber Cladding Diameter on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Fiber Optic Connector Assemblies can be evaluated for optical network equipment. Match connector format, fibre type, polish and alignment to the equipment interface.
For patch-panel interfaces, verify Connector Style, Connector Type, Simplex/Duplex, Mode and Fiber Cladding Diameter on the selected Fiber Optic Connector Assemblies. Use the exact mating part and installation dimensions specified for the selected item.
In optical verification, allow for the required mounting, routing or termination space. Check connector format, fibre type, polish and alignment before assembly.
For fiber optic connector assemblies inspection, identify the original Fiber Optic Connector Assemblies part number and mating arrangement. Compare Connector Style, Connector Type, Simplex/Duplex, Mode and Fiber Cladding Diameter before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 1063871550
Example: 1063972402
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers connector interfaces for fibre-optic signal paths. Use the exact mating part and installation dimensions specified for the selected item.
Examples in this category include LC, FC and SC. Match the selected Fiber Optic Connector Assemblies to the required connector format, fibre type, polish and alignment.
For Fiber Optic Connector Assemblies, check Connector Style, Connector Type, Simplex/Duplex, Mode and Fiber Cladding Diameter against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check connector format, fibre type, polish and alignment for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
Use the exact mating part and installation dimensions specified for the selected item. For Fiber Optic Connector Assemblies, identify the matching system and required assembly parts before ordering.
1063871550 specifies the part drawing. 1063972402 specifies Connector Style: LC and Connector Type: Plug. Check the full mating and installation requirements before treating different Fiber Optic Connector Assemblies as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include connector format, fibre type, polish and alignment and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details