icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
FCBR425QP1C50

CABLE OPT 4X25G OMNI-PATH QSFP C

FCBN410QB1C01

CABLE QSFP+ M-M 1M

FCCN414QD3C01

CABLE OPT 4X14G QSFP 1M GEN3

FCBN425QP1C20

CABLE OPT 4X25G OMNI-PATH QSFP C

FCBR425QF1C20

CBL ASSY 4X25G ETH QSFP 20M

FCBR425QF1C40

CBL ASSY 4X25G ETH QSFP 40M

FCBN510QE2C10

CABLE 4SFP+-QSFP+ M-M 10M

FCBR425QB1C15

CABLE OPT 4X25G INFINIBAND QSFP

FCBR425QD1C30

CBL ASSY 4X25G INFINI QSFP 30M

FCBR425QB1C50

CABLE OPT 4X25G INFINIBAND QSFP

FCBR425QD1C10

CBL ASSY 4X25G INFINI QSFP 10M

FCBR425QE1C25

CABLE OPT 4X25G ETHERNET QSFP CB

FCBG125SD1C10

CABLE ASSY SFP+ M-M 10M

FCBND10CD3CX0

CABLE OPT 12X10 GBPS CXP MALE CO

FCBR510QE2C03

CABLE OPT 4X10.3 GB/S,3M,QUADWIR

FCCG414QD3C10

CABLE OPT 4X14G QSFP CBL ENDS EL

FCBR510QE2C02

CABLE OPT 4X10.3 GB/S,2M,QUADWIR

FCBN425QE1CX0

CABLE QSFP28 M-M 100M

FCBN414QD3C20

CABLE OPT 4X14G FULL-DUPLEX QSFP

FCBG110SD1C10B

CABLE ASSY SFP+ M-M 10M

FCBG125SD1C01

CABLE ASSY SFP+ M-M 1M

FCBR425QP1CX0

CABLE OPT 4X25G OMNI-PATH QSFP C

FCBN425QP1C40

CABLE OPT 4X25G OMNI-PATH QSFP C

FCBG410QD3C07

CABLE OPT 4X10 GBPS FULL-DUPLEX,

About Pluggable Cables

Pluggable Cable Assemblies includes pluggable equipment interconnects with interface and retention options.

When selecting an assembly, check connector family, protocol support, active or passive design and retention.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

Pluggable Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

High-speed equipment links

High-speed equipment links

Match the connector family, protocol and supported equipment port.

Rack interconnect routing

Rack interconnect routing

Check cable length, retention and active or passive design against the port requirements.

Storage interface cabling

Storage interface cabling

Confirm the exact interface and equipment compatibility before replacement.

Port retention checks

Port retention checks

Check latch access and connector orientation as well as electrical compatibility.

Shielded pluggable cables vs. Unshielded pluggable cables

Compare the interfaces, construction and selection details of these two product options.

Shielded pluggable cables

Representative listed part: 1110251208.

  • Cable Connectors CXP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Shielded
  • Features Pull Tab
  • Frequency - Max 120Gbps

Unshielded pluggable cables

Representative listed part: 2015911010.

  • Cable Connectors QSFP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Unshielded
  • Features Pull Tab
  • Frequency - Max 56Gbps

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

How do I match a pluggable cable to an equipment port?

Check Cable Connectors, Connector Type and Gender at both ends, together with the equipment-supported interface. Similar module housings do not establish compatible electrical or signalling requirements.

Use the Features attribute and the equipment compatibility information for the exact part. Confirm the supported link and length; do not assume an active and passive assembly are direct substitutes.

Review Fastening Type, pull-tab clearance and Cable Type before specifying the installation. Provide the port spacing and routing constraints if the connector body or release mechanism has limited access.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

1110251208 is shown as shielded pluggable cables, with Shielding listed as Shielded. 2015911010 is shown as unshielded pluggable cables, with Shielding listed as Unshielded. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare connector family, protocol support, active or passive design and retention. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required connector family, protocol support, active or passive design and retention. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details