icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
FCBR425QP1C15

CABLE OPT 4X25G OMNI-PATH QSFP C

FCBN410QB1C10

CABLE QSFP+ M-M 10M

FCBR425QB1C07

CABLE OPT 4X25G INFINIBAND QSFP

FCBR510QE2C10

CABLE OPT 4X10.3 GB/S,10M,QUADWI

FCBR510QE2C15

CABLE OPT 4X10.3 GB/S,15M,QUADWI

FCCN410QD3C07

CABLE OPT 4X10 GBPS QSFP MALE CO

FCBR425QB1C01

CABLE OPT 4X25G INFINIBAND QSFP

FCBND10CD1C20

CABLE ASSY CXP M-M 20M

FCBN410QB1C25

CABLE QSFP+ M-M 25M

FCBN425QF1CX0

CBL ASSY 4X25G ETH QSFP 100M

FCBG110SD1C07B

CABLE ASSY SFP+ M-M 7M

FCBR425QP1C03

CABLE OPT 4X25G OMNI-PATH QSFP C

FCBR425QP1C05

CABLE OPT 4X25G OMNI-PATH QSFP C

FCBND10CD3C10

CABLE OPT 12X10 GBPS CXP MALE CO

FCBN510QE2C03

CABLE 4SFP+-QSFP+ M-M 3M

FCBN425QE1C05

CABLE QSFP28 M-M 5M

FCCG414QD3C25

CABLE OPT 4X14G QSFP CBL ENDS EL

FCBN425QE1C03

CABLE QSFP28 M-M 3M

FCCN414QD3C50

CABLE OPT 4X14G QSFP 50M GEN3

FCBND10CD1C10

CABLE ASSY CXP M-M 10M

FCBR425QP1C10

CABLE OPT 4X25G OMNI-PATH QSFP C

FCBN410QD3C40

CABLE OPT 4X10 GBPS FULL-DUPLEX

FCCN414QD3CX0

CABLE OPT 4X14G QSFP 100M GEN3

FCBG414QB1C10

CABLE QSFP+ M-M 10M

About Pluggable Cables

Pluggable Cable Assemblies includes pluggable equipment interconnects with interface and retention options.

When selecting an assembly, check connector family, protocol support, active or passive design and retention.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

Pluggable Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

High-speed equipment links

High-speed equipment links

Match the connector family, protocol and supported equipment port.

Rack interconnect routing

Rack interconnect routing

Check cable length, retention and active or passive design against the port requirements.

Storage interface cabling

Storage interface cabling

Confirm the exact interface and equipment compatibility before replacement.

Port retention checks

Port retention checks

Check latch access and connector orientation as well as electrical compatibility.

Shielded pluggable cables vs. Unshielded pluggable cables

Compare the interfaces, construction and selection details of these two product options.

Shielded pluggable cables

Representative listed part: 1110251208.

  • Cable Connectors CXP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Shielded
  • Features Pull Tab
  • Frequency - Max 120Gbps

Unshielded pluggable cables

Representative listed part: 2015911010.

  • Cable Connectors QSFP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Unshielded
  • Features Pull Tab
  • Frequency - Max 56Gbps

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

How do I match a pluggable cable to an equipment port?

Check Cable Connectors, Connector Type and Gender at both ends, together with the equipment-supported interface. Similar module housings do not establish compatible electrical or signalling requirements.

Use the Features attribute and the equipment compatibility information for the exact part. Confirm the supported link and length; do not assume an active and passive assembly are direct substitutes.

Review Fastening Type, pull-tab clearance and Cable Type before specifying the installation. Provide the port spacing and routing constraints if the connector body or release mechanism has limited access.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

1110251208 is shown as shielded pluggable cables, with Shielding listed as Shielded. 2015911010 is shown as unshielded pluggable cables, with Shielding listed as Unshielded. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare connector family, protocol support, active or passive design and retention. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required connector family, protocol support, active or passive design and retention. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details