icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
54126UB

CK 54126UB 90 DEGREE LUG 900KCMI

54819BE0410

CK 54819BE0410 54819BE 1/4 BLT O

54820BEUB

CK 54820BEUB 350 CU LUG LNGBRL 2

5412408BS

CK 5412408BS 54124.5 IN BOLT BEL

54812BS

CK 54812BS 54812 BELL SHAPED END

54118UB06B

CK 54118UB06B 54118 90 DEG 3/8 B

54868BE0528

CK 54868BE0528 54868BE 5/16 BOLT

54214B

CK 54214B SHORT BARREL 2 HOLE

54876BE0825

CK 54876BE0825 54876BE 1/2 BLT O

54874BENTPH

CK 54874BENTPH 54874BE W/NARROW

54187UF12

CK 54187UF12 54187 45 DEGREE BEN

54179UFSP

CK 54179UFSP 300 CU.STD.BRL.3/8

54212BE

CK 54212BE 54212 BLIND END

54859BEUB0416PH

CK 54859BEUB0416PH 1/0 CU LUG LN

54860BE0628BS

CK 54860BE0628BS 54860BE 3/8 BOL

54211I

CK 54211I 54211 INSULATED BARREL

54854BEUF0412

CK 54854BEUF0412 CU LUG 2 HOLE #

54212NT0412

CK 54212NT0412 54212NT 1/4 BOLTS

54874BENT

CK 54874BENT 54874BE NARROW TONG

54212BS0612

CK 54212BS0612 54212 BELL SHAPED

54168BSLP

CK 54168BSLP 54168 BELL SHAPED L

54856BEBS

CK 54856BEBS 54856BE BELL SHAPED

54856BEBT

CK 54856BEBT CU TP BLNK TNGE LUG

54178UF

CK 54178UF 54178 45 DEGREE BEND

About Ring Connectors

The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.

Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.

Ring Connectors

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Panel grounding points

Panel grounding points

Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.

Equipment power wiring

Equipment power wiring

For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.

Crimp inspection

Crimp inspection

In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.

Ring Connectors inspection

Ring Connectors inspection

For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.

11836 configuration vs. 11582 configuration

Compare the interfaces, construction and selection details of these two product options.

11836 configuration

Example: 11836

  • Terminal Type Circular
  • Stud/Tab Size 1/2 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Color Yellow

11582 configuration

Example: 11582

  • Terminal Type Circular
  • Stud/Tab Size 1/4 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Features Brazed Seam

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Ring Connectors include?

This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.

Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.

For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.

11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details