icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
54123NT05

CK 54123NT05 54123 NARROW TONGUE

54115NT06B

CK 54115NT06B 54115 NARROW 3/8 B

54801BE0412T

CK 54801BE0412T CU LUG 10-14 2 H

54115BE04

CK 54115BE04 54115 BLIND END 1/4

54116BT

CK 54116BT 54116 BLANK TONGUE

54814BE0412PHBS

CK 54814BE0412PHBS 54814BE 1/4 O

54123UB

CK 54123UB 54123 90 DEGREE BEND

54124BT

CK 54124BT 54124 BLANK TONGUE

583511/2BC

SC 583511/2BC 58351 1/2 WITHOUT

54115UB06

CK 54115UB06 350 CU LUG STDBRL 1

54810BE061216PH

CK 54810BE061216PH 54810BE W 3/8

54114NTBT

CK 54114NTBT 300MCM LUG NARROW T

256-30695-534

CK 25630695534 CU SP 2HL LUG SHR

54114UFSP

CK 54114UFSP 54114 45 DEG BND SI

7-1377172-1

SMP 0-0031818-0

54810BEUB

CK 54810BEUB #2 CU LUG LNGBRL 2H

54124UB

CK 54124UB 800 CU STD. BRL. 1 HO

54810BE0616PH

CK 54810BE0616PH 54810BE 3/8 ON

54812BEUF

CK 54812BEUF CU LUG #1 2 HOLE 45

54120UF

CK 54120UF 54120 45 DEGREE BEND

54122UF

CK 54122UF 700 CU. STD. BRL. 1 H

54122UB

CK 54122UB 54122TB 90 DEGREE BEN

54811BS

CK 54811BS 54811 BELL SHAPED BUT

54811BELP

CK 54811BELP 54811BE LEAD PLATED

About Ring Connectors

The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.

Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.

Ring Connectors

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Panel grounding points

Panel grounding points

Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.

Equipment power wiring

Equipment power wiring

For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.

Crimp inspection

Crimp inspection

In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.

Ring Connectors inspection

Ring Connectors inspection

For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.

11836 configuration vs. 11582 configuration

Compare the interfaces, construction and selection details of these two product options.

11836 configuration

Example: 11836

  • Terminal Type Circular
  • Stud/Tab Size 1/2 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Color Yellow

11582 configuration

Example: 11582

  • Terminal Type Circular
  • Stud/Tab Size 1/4 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Features Brazed Seam

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Ring Connectors include?

This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.

Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.

For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.

11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details