Panel grounding points
Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 54811BEUFPH | CK 54811BEUFPH 54811BE 45 DEG BE |
| 5412008BS | CK 5412008BS 54120.5 IN BOLT BEL |
| 54809BET | CK 54809BET 54809BE TOP STACK |
| 54809BS | CK 54809BS 54809 BELL SHAPED END |
| 54809BENT0312 | CK 54809BENT0312 54809BE NARROW |
| 54809DBL | CK 54809DBL 54809BE CANOE LUG BA |
| 54118UF06B | CK 54118UF06B 54118 90 DEG BND 3 |
| 54818BEUF0616PH | CK 54818BEUF0616PH 4/0 CU LUG 2 |
| 54818BE0622T | CK 54818BE0622T 54818BE 3/8 ON 1 |
| 256-30695-1962 | CK 256306951962 |
| 256-30695-1984 | CK 256306951984 54170 LONG TONGU |
| 256-30695-537 | CK 25630695537 CU SP 2HL LUG SHR |
| 54113UB10SP | CK 54113UB10SP 54113 90 DEG. 5/8 |
| 54113NP | CK 54113NP 54113 NICKLE PLATED |
| 54114BTSP | CK 54114BTSP 54114 BLANK TONGUE |
| 256-30695-2008 | CK 256306952008 58826BE MADE TO |
| 256-30695-1978 | CK 256306951978 |
| 256-30695-1983 | CK 256306951983 2/0 LONG 1/2 BLT |
| 58277PFM350BS | 58277PFM350BS |
| 58277UF | CK 58277UF CU LUG 400 WELD 2 HOL |
| 256-30695-1747 | CK 256306951747 54518 PLAIN FINI |
| 256-30695-1746 | CK 256306951746 54516 PLAIN FINI |
| 256-30695-1515 | CK 256306951515 CU 1HL LUG SHRTB |
| 256-30695-1555 | CK 256306951555 LONG BARREL 2 H |
The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.
Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.
Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.
For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.
In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.
For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 11836
Example: 11582
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.
Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.
For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.
11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details