Panel grounding points
Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 54187UFB | CK 54187UFB 54187 45 DEGREE BEND |
| 54212NTUF | CK 54212NTUF 54212 NARROW TONGUE |
| B10-8R | CONN RING 10 MM M8, 8AWG 5/16" |
| 54178T | CK 54178T 54178 TOP STACKING LUG |
| 54920BEUB | CK 54920BEUB CU LUG 600MCM LONG |
| 54868BE0412PH | CK 54868BE0412PH 54868BE 1/4 BOL |
| 58526PFNMPH | CK 58526PFNMPH 54526 PLAIN FIN N |
| 192210774 | CONN RING FLAT 3/0AWG #3/8 CRIMP |
| 192210753 | CONN RING FLAT 6AWG #3/8 CRIMP |
| 190670106 | CONN RING CIRC 1/0AWG #3/4 CRIMP |
| 322872 | CONN RING CIRC 16-22AWG #6 CRIMP |
| 3240109 | CONN RING CIRC 2AWG M16 CRIMP |
| 191930225 | CONN RING CIRC 6AWG #10 CRIMP |
| 191930556 | CONN RING FLAT 1/0AWG #1/2 CRIMP |
| 321441 | CONN RING CIRC 8AWG #10 CRIMP |
| 190670102 | CONN RING FLAT 1/0AWG #7/16 |
| 1577962-1 | CONN RING CIRC 20AWG #2 CRIMP |
| 322376 | CONN RING CIRC 14-16AWG #1/4 |
| 3240222 | CONN RING CIRC 8AWG M10 CRIMP |
| 192210764 | CONN RING FLAT 3/0AWG #3/8 CRIMP |
| 322340 | CONN RING CIRC 14-16AWG #5/16 |
| 50830-2 | CONN RING CIRC 24-26AWG #10 |
| 1577627-1 | CONN RING CIRC 20AWG #1/4 CRIMP |
| 3241213 | CONN RING CIRC 10-12AWG M8 CRIMP |
The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.
Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.
Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.
For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.
In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.
For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 11836
Example: 11582
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.
Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.
For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.
11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details