icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
5412606PHBS

CK 5412606PHBS 54126 3/8 BLT PEE

B50-12R

CONN RING 50 MM M12 , 1/0 1/2"

54826BEUB

CK 54826BEUB 1000MCM CU LUG 2 HO

54914BE06

CK 54914BE06 54914BE 3/8 BOLT

54876BEUF0616PH

CK 54876BEUF0616PH 500MCM CU LUG

54874BEBSSP

CK 54874BEBSSP 54874BE BELL SHAP

54923BENT

CK 54923BENT 54923BE NARROW TONG

58826BEBTB

CK 58826BEBTB 58826BE BLANK TONG

54866BESPPH

CK 54866BESPPH 54866BE SILVE PLA

54187T

CK 54187T 54187 TOP STACK LUG

54821BEUB

CK 54821BEUB 500 CU LUG LNGBRL 2

B70-10R

CONN RING 70 MM M10 , 2/0 3/8"

54916BESPPH

CK 54916BESPPH 54916BE SILVER PL

54126UF

CK 54126UF 900 CU STD BRL 1 HOLE

54178NTBEUB08

CK 54178NTBEUB08 54178 NARROW 90

58177UF06

CK 58177UF06 400 WELD CU STD BRL

54286NTUF

CK 54286NTUF 54286 NARROW TONGUE

54116BE06

CK 54116BE06 54116 BLIND END 3/8

58926BEUB

CK 58926BEUB COPPER LUG 900MCM 1

54282PFNM

CK 54282PFNM 54282 PLAIN FINISH

54223NTBT

CK 54223NTBT 54223 NARROW TONGUE

54819BEUB

CK 54819BEUB 300 CU LUG LNG BRL

54917BE12SP

CK 54917BE12SP 54917BE 3/4 BOLT

256-30695-230

CK 25630695230 CU LP 1HL LUG SHO

About Ring Connectors

The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.

Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.

Ring Connectors

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Panel grounding points

Panel grounding points

Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.

Equipment power wiring

Equipment power wiring

For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.

Crimp inspection

Crimp inspection

In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.

Ring Connectors inspection

Ring Connectors inspection

For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.

11836 configuration vs. 11582 configuration

Compare the interfaces, construction and selection details of these two product options.

11836 configuration

Example: 11836

  • Terminal Type Circular
  • Stud/Tab Size 1/2 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Color Yellow

11582 configuration

Example: 11582

  • Terminal Type Circular
  • Stud/Tab Size 1/4 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Features Brazed Seam

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Ring Connectors include?

This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.

Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.

For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.

11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details