icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
54970BE06NP

CK 54970BE06NP 54970BE 3/8 BOLT

54162UF

54162UF

54851BEBS

CK 54851BEBS 54851BE BELLED END

54814BEUF

CK 54814BEUF 54814BE 45 DEGREE B

54857BEUB0616PH

CK 54857BEUB0616PH 54857BE W/90

54207UBB

CK 54207UBB 54207 90 DEGREE BEND

54815BEBS

CK 54815BEBS 54815BE BELL SHAPED

54917BEUBSP

CK 54917BEUBSP 54917BE 90 DEG BE

54214NT0614

CK 54214NT0614 54214 NARROW TONG

54917BEUB12SP

CK 54917BEUB12SP 54917BE 90 DEG

54852BEUF0408PH

CK 54852BEUF0408PH 54852BE 45 DE

5410402T

CK 5410402T 54104 #8 STD. TOP ST

54872BEUF0616PH

CK 54872BEUF0616PH 350MCM CU LUG

B16-8R

CONN RING 16 MM M8, 6AWG 5/16"

B16-5R

CONN RING 16 MM M5, 6 AWG #10

54287SP

CK 54287SP 54287 SILVER PLATED

58265NT0616

CK 58265NT0616 58265 NARROW 3/8

54851BEPH

CK 54851BEPH 54851BE PEEP HOLE

54116UB06B

CK 54116UB06B 54116 90 DEG BEND

58171NT

CK 58171NT 58171 NARROW TONGUE 1

54922BEUFNP

CK 54922BEUFNP 54922BEE 45 DEGRE

54922BEBTSP

CK 54922BEBTSP 54922BE BLNK TNG

58174UBBT

CK 58174UBBT 58174 90 DEGREE BEN

54872BEUFPH

CK 54872BEUFPH 54872BE 45 DEGREE

About Ring Connectors

The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.

Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.

Ring Connectors

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Panel grounding points

Panel grounding points

Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.

Equipment power wiring

Equipment power wiring

For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.

Crimp inspection

Crimp inspection

In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.

Ring Connectors inspection

Ring Connectors inspection

For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.

11836 configuration vs. 11582 configuration

Compare the interfaces, construction and selection details of these two product options.

11836 configuration

Example: 11836

  • Terminal Type Circular
  • Stud/Tab Size 1/2 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Color Yellow

11582 configuration

Example: 11582

  • Terminal Type Circular
  • Stud/Tab Size 1/4 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Features Brazed Seam

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Ring Connectors include?

This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.

Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.

For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.

11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details