icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
54816BENP

CK 54816BENP 54816BE NICKEL PLAT

54810BE061216

CK 54810BE061216 54810BE W/2 HL

54115NTUF06

CK 54115NTUF06 54115 NARROW TNG

696632-1

COPALUM R 1/0AL 1/4 90 DEG

54178UBBS

CK 54178UBBS 54178 90 DEG BND BE

54115NTUB06

CK 54115NTUB06 54115 NARROW TNG

54942BE06B

CK 54942BE06B 54942BE 3/8 BOLT B

54872BENTPH

CK 54872BENTPH 54872BE NARROW TO

54851BEUB

CK 54851BEUB 54851BE 90 DEGREE B

256-30695-1878

CK 256306951878 2/0 SHORT BARREL

54817BE0416BS

CK 54817BE0416BS 54817BE 1/4 ON

54174PFNM

CK 54174PFNM 54174 PLAIN FINISH

54915BE06T

CK 54915BE06T 54915BE 3/8 TOP ST

54112UFSP

CK 54112UFSP 54113 45 DEG BND SI

54915BE12SP

CK 54915BE12SP 54915BE 3/4 BOLT

256-30695-524

CK 25630695524 CU SP 2HL LUG SHR

54150UBBT

CK 54150UBBT 54150 90 DEGREE BEN

54113UBSP

CK 54113UBSP 54113 90 DEG BND SI

5411606B

CK 5411606B 54116 3/8 BOLT BOTTO

58166UF

CK 58166UF 4/0 WELD CU STD BRL 1

54113BE

CK 54113BE 250MCM 1 HOLE 1/2 MOU

54283UB

CK 54283UB CU 2 HOLE 90 DEG 400M

54260BT

CK 54260BT CU TP BLNK TNGE LUG S

54152T

CK 54152T CU TP 1HL LUG TOPSTACK

About Ring Connectors

The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.

Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.

Ring Connectors

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Panel grounding points

Panel grounding points

Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.

Equipment power wiring

Equipment power wiring

For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.

Crimp inspection

Crimp inspection

In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.

Ring Connectors inspection

Ring Connectors inspection

For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.

11836 configuration vs. 11582 configuration

Compare the interfaces, construction and selection details of these two product options.

11836 configuration

Example: 11836

  • Terminal Type Circular
  • Stud/Tab Size 1/2 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Color Yellow

11582 configuration

Example: 11582

  • Terminal Type Circular
  • Stud/Tab Size 1/4 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Features Brazed Seam

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Ring Connectors include?

This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.

Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.

For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.

11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details