Terminal strips
Spade Connectors can be evaluated for terminal strips. Match stud size, tongue width, conductor area and crimp requirements to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| PN14-8SLF-M | CONN SPADE TERM 14-16AWG #8 BLU |
| P18-8F-C | CONN SPADE TERM 18-22AWG #8 |
| PV18-10LF-CY | CONN SPADE TERM 18-22AWG #10 RED |
| P10-6F-D | CONN SPADE TERM 10-12AWG #6 |
| PMV1-3FB-3K | CONN SPADE TERM 18-22AWG M3 RED |
| PV14-10FN-M | CONN SPADE TERM 14-16AWG #10 BLU |
| P22-6F-M | CONN SPADE TERM 22-26AWG #6 |
| P10-10F-Q | CONN SPADE TERM 10-12AWG #10 |
| P14-8SLF-M | CONN SPADE TERM 14-16AWG #8 |
| P14-10LF-M | CONN SPADE TERM 14-16AWG #10 |
| PV14-10LFN-M | CONN SPADE TERM 14-16AWG #10 BLU |
| PV18-10F-CY | CONN SPADE TERM 18-22AWG #10 RED |
| PN14-10LF-M | CONN SPADE TERM 14-16AWG #10 BLU |
| P14-6LF-M | CONN SPADE TERM 14-16AWG #6 |
| PNF18-10LF-C | CONN SPADE TERM 18-22AWG #10 RED |
| PN22-4F-C | CONN SPADE TERM 22-26AWG #4 YEL |
| PNF10-14F-L | CONN SPADE TERM 10-12AWG #1/4 |
| PV10-14SLF-L | CONN SPADE TERM 10-12AWG #1/4 |
| PNF18-8LF-3K | CONN SPADE TERM 18-22AWG #8 RED |
| P10-6LF-D | CONN SPADE TERM 10-12AWG #6 |
| PV14-8FB-3K | CONN SPADE TERM 14-16AWG #8 BLU |
| PV14-8FFB-3K | CONN SPADE TERM 14-16AWG #8 BLU |
| PH18-10F-Q | CONN SPADE TERM 18-22AWG #10 RED |
| PV14-10LF-E | CONN SPADE TERM 14-16AWG #10 BLU |
The Spade Connectors range covers stud-mounted wire terminations with an open fork tongue.
Compare stud size, tongue width, conductor area and crimp requirements for the required installation. Use the exact mating part and installation dimensions specified for the selected item.
Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Spade Connectors can be evaluated for terminal strips. Match stud size, tongue width, conductor area and crimp requirements to the equipment interface.
For panel wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Spade Connectors. Use the exact mating part and installation dimensions specified for the selected item.
In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, tongue width, conductor area and crimp requirements before assembly.
For spade connectors inspection, identify the original Spade Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 11837
Example: 191150014
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers stud-mounted wire terminations with an open fork tongue. Use the exact mating part and installation dimensions specified for the selected item.
Examples in this category include Standard, Spring, Snap and Flanged. Match the selected Spade Connectors to the required stud size, tongue width, conductor area and crimp requirements.
For Spade Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check stud size, tongue width, conductor area and crimp requirements for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
Use the exact mating part and installation dimensions specified for the selected item. For Spade Connectors, identify the matching system and required assembly parts before ordering.
11837 specifies Terminal Type: Standard and Stud/Tab Size: 10 Stud. 191150014 specifies Terminal Type: Spring, Snap and Stud/Tab Size: 10 Stud. Check the full mating and installation requirements before treating different Spade Connectors as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, tongue width, conductor area and crimp requirements and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details