icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
EV10-10LFB-Q

STRONGHOLD LOCKING FORK TERMINAL

E10-6FB-Q

STRONGHOLD FORK TERMINAL, NON-IN

EV18-10FB-L

STRONGHOLD FORK TERMINAL, VINYL

EV10-10FNB-Q

STRONGHOLD NARROW FORK TERMINAL,

E10-14LFB-Q

STRONGHOLD LOCKING FORK TERMINAL

EV10-10FB-Q

STRONGHOLD FORK TERMINAL, VINYL

E18-8FB-L

STRONGHOLD FORK TERMINAL, NON-IN

E14-8LFB-Q

STRONGHOLD LOCKING FORK TERMINAL

E18-8LFB-Q

STRONGHOLD LOCKING FORK TERMINAL

E10-6LFB-Q

STRONGHOLD LOCKING FORK TERMINAL

EV10-14LFB-Q

STRONGHOLD LOCKING FORK TERMINAL

EV14-8LFB-Q

STRONGHOLD LOCKING FORK TERMINAL

EV14-6LFB-L

STRONGHOLD LOCKING FORK TERMINAL

EV14-6FNB-Q

STRONGHOLD NARROW FORK TERMINAL,

EV14-6LFB-Q

STRONGHOLD LOCKING FORK TERMINAL

E14-8FB-Q

STRONGHOLD FORK TERMINAL, NON-IN

EV18-8LFB-Q

STRONGHOLD LOCKING FORK TERMINAL

E10-8FB-Q

STRONGHOLD FORK TERMINAL, NON-IN

E10-10LFB-Q

STRONGHOLD LOCKING FORK TERMINAL

EV10-6LFB-Q

STRONGHOLD LOCKING FORK TERMINAL

EV14-10LFB-Q

STRONGHOLD LOCKING FORK TERMINAL

E18-6LFB-L

STRONGHOLD LOCKING FORK TERMINAL

E18-6FB-Q

STRONGHOLD FORK TERMINAL, NON-IN

E18-6FB-L

STRONGHOLD FORK TERMINAL, NON-IN

About Spade Connectors

The Spade Connectors range covers stud-mounted wire terminations with an open fork tongue.

Compare stud size, tongue width, conductor area and crimp requirements for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.

Spade Connectors

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Terminal strips

Terminal strips

Spade Connectors can be evaluated for terminal strips. Match stud size, tongue width, conductor area and crimp requirements to the equipment interface.

Panel wiring

Panel wiring

For panel wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Spade Connectors. Use the exact mating part and installation dimensions specified for the selected item.

Crimp inspection

Crimp inspection

In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, tongue width, conductor area and crimp requirements before assembly.

Spade Connectors inspection

Spade Connectors inspection

For spade connectors inspection, identify the original Spade Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.

11837 configuration vs. 191150014 configuration

Compare the interfaces, construction and selection details of these two product options.

11837 configuration

Example: 11837

  • Terminal Type Standard
  • Stud/Tab Size 10 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 18-20 AWG
  • Insulation Insulated with Heat Shrink
  • Features Brazed Seam

191150014 configuration

Example: 191150014

  • Terminal Type Spring, Snap
  • Stud/Tab Size 10 Stud
  • Width - Outer Edges 0.330" (8.38mm)
  • Length - Overall 0.921" (23.39mm)
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 18-22 AWG

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Spade Connectors include?

This category covers stud-mounted wire terminations with an open fork tongue. Use the exact mating part and installation dimensions specified for the selected item.

Examples in this category include Standard, Spring, Snap and Flanged. Match the selected Spade Connectors to the required stud size, tongue width, conductor area and crimp requirements.

For Spade Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check stud size, tongue width, conductor area and crimp requirements for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Use the exact mating part and installation dimensions specified for the selected item. For Spade Connectors, identify the matching system and required assembly parts before ordering.

11837 specifies Terminal Type: Standard and Stud/Tab Size: 10 Stud. 191150014 specifies Terminal Type: Spring, Snap and Stud/Tab Size: 10 Stud. Check the full mating and installation requirements before treating different Spade Connectors as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, tongue width, conductor area and crimp requirements and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details