icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
150248-M01-131

6ft version, 1226M-OBD2F

PAC-022-48

SAE 48" EXTENSION CABLE

D-500-9467-4-S16-078

CABLE IN LINE COUPLER 1WR 6.50'

DGA641415

DIGIWAVE 15 FEET TELEPHONE LINE

D-500-L456-4-612-012

CABLE IN LINE COUPLER 2WIRE 1'

EM741013

RCA MALE TO 2XRCA FEMALE CABLE G

6720000517

MS-C32B-B26X04-R8D-1.5

6720000533

SP-16 CLAM TO (2) 8 POS BLZ

6720000598

MS-C32T-FFLX03-X8D-005

6720000589

MS-C2+T02-C2+T02-L8D-025

6720000596

MS-C32T-FFLX03-X8D-1.5

D-500-L456-2-613-120

CABLE IN LINE COUPLER 2WIRE 10'

N12677

N12677 = HARNESS

CA7849-000

CABLE IN LINE COUPLER 1WR 6.50'

6720000547

SP-CABLE BL 10 TO BL 10 1M

6720000597

MS-C32T-FFLX03-X8D-002

D-500-0255-225

CABLE IN LINE COUPLER 1WR 18.75'

6720000550

MS-C2+B-C6+M09-L8D-5.5

6720000549

MS-C32B-C26M09-R8D-5.5

D-500-0465-1-613-360-T

CABLE IN LINE COUPLER 1WIRE 30'

6720000551

MS-C2+B-C6+M09-R8D-5.5

6720000521

MS-C32B-B26X04-R8D-015

6720000544

SP-32 CLAM TO 32 CLAM W/DRAIN

6720000542

SP-32 CLAM TO 32 CLAM W/DRAIN

About Specialized Cable Assemblies

Specialized Cable Assemblies includes application-specific interconnects, including defined bus and termination arrangements.

When selecting an assembly, check equipment reference, bus or stub arrangement, shielding, termination and exposed length.

A specialised assembly must be matched to its system drawing. A similar connector or listed overall length does not establish an equivalent bus connection.

Specialized Cable Assemblies

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

System-specific harnesses

System-specific harnesses

Match the equipment drawing and the exact termination arrangement.

Bus interface connections

Bus interface connections

Check the bus or stub arrangement and shielding requirements.

Equipment integration

Equipment integration

Verify routing, exposed length and connector details against the system design.

Replacement verification

Replacement verification

Compare the complete construction rather than assuming equivalent operation from connector shape.

Bus-to-bus coupler assemblies vs. Bus-to-open coupler assemblies

Compare the interfaces, construction and selection details of these two product options.

Bus-to-bus coupler assemblies

Representative listed part: 4-1190926-4.

  • Type Data Coupler, Bus to Bus
  • Number of Lines 2
  • Features Not specified for this example
  • Cable Length - Unexposed Not specified for this example

Bus-to-open coupler assemblies

Representative listed part: D-500-0467-4-613-078.

  • Type Data Coupler, Bus to Open
  • Number of Lines 1
  • Features Not specified for this example
  • Cable Length - Unexposed 6.50' (1.98m) 78.0"

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

How do I distinguish bus-to-bus and bus-to-open assemblies?

Use the full Type entry and the equipment drawing to identify the required end arrangement. A bus-to-open listing needs the intended final connection defined rather than being treated as an already terminated link.

Compare Number of Lines and Features with the system connection plan. Include the required coupler or stub arrangement and end details so the exact specialised assembly can be reviewed.

Refer to the field name Cable Length - Unexposed and compare it with the supplier drawing. Confirm the measurement reference and finished end arrangement before using it as an installation dimension.

A specialised assembly must be matched to its system drawing. A similar connector or listed overall length does not establish an equivalent bus connection.

4-1190926-4 is shown as bus-to-bus coupler assemblies, with Type listed as Data Coupler, Bus to Bus. D-500-0467-4-613-078 is shown as bus-to-open coupler assemblies, with Type listed as Data Coupler, Bus to Open. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare equipment reference, bus or stub arrangement, shielding, termination and exposed length. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required equipment reference, bus or stub arrangement, shielding, termination and exposed length. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details