icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
ELI080100

CONN TERM BLK CARD EDGE 8POS

232-523/007-000

DOUBLE PIN HEADER; DIN-35 RAIL M

ELD151100

CONN TERM BLK CARD EDGE 15POS

1597830000

HEADER COUPLER 5.08MM 9POS OR

KF02A0500000G

750 TB PCB CONNECTOR

232-551/007-000

DOUBLE PIN HEADER; DIN-35 RAIL M

770-661

THREE-PHASE TO SINGLE-PHASE DIST

KF0870500000G

500 TB PCB CONNECTOR

KF08A0500000G

750 TB PCB CONNECTOR

KF0670500000G

500 TB PCB CONNECTOR

1898402

TERM BLOCK PCB

KF0910500000G

350 TB PCB CONNECTOR

KF05A0500000G

750 TB PCB CONNECTOR

KF06A0500000G

750 TB PCB CONNECTOR

KF0370500000G

500 TB PCB CONNECTOR

KF0710500000G

350 TB PCB CONNECTOR

KF0610500000G

350 TB PCB CONNECTOR

KF0570500000G

500 TB PCB CONNECTOR

770-1681

H-DISTRIBUTION CONNECTOR 4-POLE

KF0470500000G

500 TB PCB CONNECTOR

8174830000

SKH2 D32 LPA1 PLUG IN CONN

KF0310500000G

350 TB PCB CONNECTOR

KF0410500000G

350 TB PCB CONNECTOR

1597770000

HEADER COUPLER 5.08MM 3POS OR

About Terminal Block Adapters

The Terminal Block Adapters range covers wire connections organised in compatible terminal-block systems.

Compare wire range, pitch, mounting, jumper system and electrical ratings for the required installation. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Review wire range, pitch, mounting, jumper system and electrical ratings on the individual product page before choosing a part.

Terminal Block Adapters

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Control cabinets

Control cabinets

Terminal Block Adapters can be evaluated for control cabinets. Match wire range, pitch, mounting, jumper system and electrical ratings to the equipment interface.

Equipment wiring

Equipment wiring

For equipment wiring, verify wire range, pitch, mounting, jumper system and electrical ratings on the selected Terminal Block Adapters. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

Interface assemblies

Interface assemblies

In interface assemblies, allow for the required mounting, routing or termination space. Check wire range, pitch, mounting, jumper system and electrical ratings before assembly.

Terminal Block Adapters inspection

Terminal Block Adapters inspection

For terminal block adapters inspection, identify the original Terminal Block Adapters part number and mating arrangement. Compare wire range, pitch, mounting, jumper system and electrical ratings before substitution.

1239.3 configuration vs. 1233.3 configuration

Compare the interfaces, construction and selection details of these two product options.

1239.3 configuration

Example: 1239.3

    1233.3 configuration

    Example: 1233.3

      The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

      Frequently Asked Questions

      Practical answers to help you prepare your drawing and specifications.

      What does Terminal Block Adapters include?

      This category covers wire connections organised in compatible terminal-block systems. Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion.

      Match the selected Terminal Block Adapters to the required wire range, pitch, mounting, jumper system and electrical ratings.

      For Terminal Block Adapters, check wire range, pitch, mounting, jumper system and electrical ratings against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

      Check wire range, pitch, mounting, jumper system and electrical ratings for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

      Check both adapter interfaces and the contact mapping. A connector-format change alone does not provide protocol or signal conversion. For Terminal Block Adapters, identify the matching system and required assembly parts before ordering.

      1239.3 specifies the part drawing. 1233.3 specifies the part drawing. Check the full mating and installation requirements before treating different Terminal Block Adapters as replacements.

      Send the manufacturer and full part number, quantity and required delivery destination. For this category, include wire range, pitch, mounting, jumper system and electrical ratings and a mating or installation drawing when a replacement is needed.

      Tell us what you need to build

      Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

      • Engineering review within 24 hours
      • NDA available before drawings are shared
      • Free samples in 5-7 days after drawing approval
      Inquiry Drawer

      Review & Submit Request

      This site uses cookies

      We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details