icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
10054999-N3500BULF

CONN GIG-ARRAY PLUG

745462002

4X PCIE CABLE ASSY -0.84M, CUSTO

10137656-2075LF

0.75M 30AWG INTERNAL MIN

10077488-N0498QDLF

BERGSTIK

10093381-R0300BULF

30AWG DENSI-SHIELD ASSY

10087273-001

HEADER BERGSTIK

2050591002

NPIO 8X RAD TO NPIO 8X STR

747577603

QSFPQSFP CU PATCH CBL 3M 26AWG

10087273-002

HEADER BERGSTIK

PSF1AXA4MBUN

SFP+ 10GIG DIRECT ATTACH ACTIVE

2157321010

MCIO 8X RE TO SLIMSAS LP 8X RAD

10131564-2040LF

0.4M 30AWG INTERNAL MINI SAS

10137656-2070LF

0.7M 30AWG INTERNAL MINI

2157321002

MCIO 8X LE TO SLIMSAS 8X STR

2079911011

SLIMSAS 8X RAD TO 2-SLIMSAS 4X S

10018960-M0700AULF

CABLE INFINIBAND

10054999-N2200BULF

CONN GIG-ARRAY PLUG

2157321009

MCIO 8X RE TO SLIMSAS 8X STR

745463002

4X PCIE CABLE ASSY- 0.84M, CUSTO

1110753105

IPASS X4 HD 3.0 1.5M 30AWG FRU 0

PSF1AXD8MBUL

SFP+ 10GIG DIRECT ATTACH ACTIVE

PSF1AXA4.5MBUN

SFP+ 10GIG DIRECT ATTACH ACTIVE

PSF1AXA3.5MBUN

SFP+ 10GIG DIRECT ATTACH ACTIVE

1110759220

4X MINISAS HD 100OHM 2.0M, W/INT

About Pluggable Cables

Pluggable Cable Assemblies includes pluggable equipment interconnects with interface and retention options.

When selecting an assembly, check connector family, protocol support, active or passive design and retention.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

Pluggable Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

High-speed equipment links

High-speed equipment links

Match the connector family, protocol and supported equipment port.

Rack interconnect routing

Rack interconnect routing

Check cable length, retention and active or passive design against the port requirements.

Storage interface cabling

Storage interface cabling

Confirm the exact interface and equipment compatibility before replacement.

Port retention checks

Port retention checks

Check latch access and connector orientation as well as electrical compatibility.

Shielded pluggable cables vs. Unshielded pluggable cables

Compare the interfaces, construction and selection details of these two product options.

Shielded pluggable cables

Representative listed part: 1110251208.

  • Cable Connectors CXP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Shielded
  • Features Pull Tab
  • Frequency - Max 120Gbps

Unshielded pluggable cables

Representative listed part: 2015911010.

  • Cable Connectors QSFP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Unshielded
  • Features Pull Tab
  • Frequency - Max 56Gbps

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

How do I match a pluggable cable to an equipment port?

Check Cable Connectors, Connector Type and Gender at both ends, together with the equipment-supported interface. Similar module housings do not establish compatible electrical or signalling requirements.

Use the Features attribute and the equipment compatibility information for the exact part. Confirm the supported link and length; do not assume an active and passive assembly are direct substitutes.

Review Fastening Type, pull-tab clearance and Cable Type before specifying the installation. Provide the port spacing and routing constraints if the connector body or release mechanism has limited access.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

1110251208 is shown as shielded pluggable cables, with Shielding listed as Shielded. 2015911010 is shown as unshielded pluggable cables, with Shielding listed as Unshielded. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare connector family, protocol support, active or passive design and retention. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required connector family, protocol support, active or passive design and retention. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details