icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
PCIEC-098-1000-EC-EM-P-85

1.00 MM PCI EXPRESS INTERNAL CA

PSF1AXD7MBUBN

SFP+ 10GIG DIRECT ATTACH ACTIVE

PSF1AXD13.5MBLN

SFP+ 10GIG DIRECT ATTACH ACTIVE

747520285

SFP+ TO SFP+ 10G 5.0 M 28 AWG

1001890434

4X HD SHORT BODY, 730MM 00KG402

PSF1AXD7MBUL

SFP+ 10GIG DIRECT ATTACH ACTIVE

1000839009

QSFP TO HD 12G PASS CBL 2M 26AWG

PSF1AXA3MBLN

SFP+ 10GIG DIRECT ATTACH ACTIVE

1000180004

8X25 VHDM TO 8X25 VHDM CABLE ASS

PSF1AXD8MBUBN

SFP+ 10GIG DIRECT ATTACH ACTIVE

1001890436

4X HD SHORT BODY TO COMBOSAS 600

739311001

SFP100-ACTV-DC2-IB-NEQ-EE

2113011215

SLIMSAS 8X LP STR TO SLIMSAS 8X

747642303

QSFP+TO 4 SFP+2M 30AWG CU BREAKO

2073712006

SLIMSAS 4X STR + POWER TO M.2 +

1110751033

HD TO HD,CU,3.0M 112-00438

2150711004

MCIO 8X STR TO SLIMSAS 8X STR W/

745551114

X8 IPASS CABLE, 0.35M HP FRU

2168331110

MCIO 8X RAD PT TO MCIO 8X REX PT

745095004

12X ASY,28 AWG,16 PR BUNDLD RAW

1110751030

HD TO HD, 0.5M 112-00435

1110751996

IPASS X4 HD TO HD 3.0, 1M, 71743

2002271155

NPIO 8X RA LOOPBACK 0.4M

2002280101

4X ZHD STR TO STR, 300MM, CTRL T

About Pluggable Cables

Pluggable Cable Assemblies includes pluggable equipment interconnects with interface and retention options.

When selecting an assembly, check connector family, protocol support, active or passive design and retention.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

Pluggable Cables

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

High-speed equipment links

High-speed equipment links

Match the connector family, protocol and supported equipment port.

Rack interconnect routing

Rack interconnect routing

Check cable length, retention and active or passive design against the port requirements.

Storage interface cabling

Storage interface cabling

Confirm the exact interface and equipment compatibility before replacement.

Port retention checks

Port retention checks

Check latch access and connector orientation as well as electrical compatibility.

Shielded pluggable cables vs. Unshielded pluggable cables

Compare the interfaces, construction and selection details of these two product options.

Shielded pluggable cables

Representative listed part: 1110251208.

  • Cable Connectors CXP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Shielded
  • Features Pull Tab
  • Frequency - Max 120Gbps

Unshielded pluggable cables

Representative listed part: 2015911010.

  • Cable Connectors QSFP
  • Connector Type Plug to Plug
  • Cable Type Round, Twin Axial
  • Shielding Unshielded
  • Features Pull Tab
  • Frequency - Max 56Gbps

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

How do I match a pluggable cable to an equipment port?

Check Cable Connectors, Connector Type and Gender at both ends, together with the equipment-supported interface. Similar module housings do not establish compatible electrical or signalling requirements.

Use the Features attribute and the equipment compatibility information for the exact part. Confirm the supported link and length; do not assume an active and passive assembly are direct substitutes.

Review Fastening Type, pull-tab clearance and Cable Type before specifying the installation. Provide the port spacing and routing constraints if the connector body or release mechanism has limited access.

Confirm the exact port and equipment compatibility. Similar connector envelopes do not establish supported data rate or active-cable operation.

1110251208 is shown as shielded pluggable cables, with Shielding listed as Shielded. 2015911010 is shown as unshielded pluggable cables, with Shielding listed as Unshielded. These are two examples, not a statement that every part has either specification.

Provide the original manufacturer and complete part number, or a drawing. For this range, compare connector family, protocol support, active or passive design and retention. Identify any requirement not covered by the listing rather than selecting only by length or appearance.

Supply a mating-interface drawing and the required connector family, protocol support, active or passive design and retention. Add quantity, destination and any inspection requirements. Changes must be reviewed for the selected construction before compatibility, pricing or delivery can be confirmed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details