icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
54947BEBS

CK 54947BEBS 54947BE BELL SHAPED

54818BEUB0616PH

CK 54818BEUB0616PH 250 CU LUG LN

19067-0106

RING NYLAKRIMP FUNNEL ENTRY (H-9

256306951298UF

CK 256306951298UF 256-30695-1298

DZ3FA3

POWER LUGS

2395788

#3 AWG, 1/4 Inch Stud, Long Barr

54136B

CK 54136B 54136 BOTTOM STACKING

54209UFBT

CK 54209UFBT 54209 45 DEGREE BEN

54951BEUBSP

CK 54951BEUBSP 54951BE 90 DEG SI

58171BT

CK 58171BT 58171 BLANK TONGUE

2397894

400 MCM, 5/8 Inch Stud, Long Bar

54951BEUFSP

CK 54951BEUFSP 54951BE 45 DEG SI

54211T

CK 54211T SHORT BARREL 2 HOLE TO

54136BE

CK 54136BE 54136 BLIND END

54855N

BG 54855N FIGURE 6 CONNECTOR

54261UF

CK 54261UF COPPER LUG 2/0 2 HOLE

54910BEUBPH

CK 54910BEUBPH 54910BE 90 DEG BE

54809BEBSP

CK 54809BEBSP #1 AWG LNG BRL BOT

54818BEUB

CK 54818BEUB 4/0 CU LUG LNGBRL 2

54140BE

CK 54140BE 54140 BLIND END

54214NT0510

CK 54214NT0510 54214 NARROW 5/16

54821BEUBPH

CK 54821BEUBPH 54821BE 90 DEGREE

54913BESP

CK 54913BESP 54913BE SILVER PLAT

54855BE0412PHBS

CK 54855BE0412PHBS 54855BE 1/4 O

About Ring Connectors

The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.

Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.

Ring Connectors

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Panel grounding points

Panel grounding points

Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.

Equipment power wiring

Equipment power wiring

For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.

Crimp inspection

Crimp inspection

In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.

Ring Connectors inspection

Ring Connectors inspection

For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.

11836 configuration vs. 11582 configuration

Compare the interfaces, construction and selection details of these two product options.

11836 configuration

Example: 11836

  • Terminal Type Circular
  • Stud/Tab Size 1/2 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Color Yellow

11582 configuration

Example: 11582

  • Terminal Type Circular
  • Stud/Tab Size 1/4 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Features Brazed Seam

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Ring Connectors include?

This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.

Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.

For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.

11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details