icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
54115NT06T

CK 54115NT06T 54115 NARROW 3/8 B

54275BELP

CK 54275BELP 54275 BLIND END LEA

54866BE0820

CK 54866BE0820 54866BE.5 INCH BO

256-30695-1743

CK 256306951743 54513 PLAIN FINI

256-30695-1960

CK 256306951960

54950BE10

CK 54950BE10 54950BE WITH 5/8 BO

54860BE0616NP

CK 54860BE0616NP 54860BE 3/8 BLT

54917BEUFSP

CK 54917BEUFSP 54917BE 45 DEGREE

54174NTB

CK 54174NTB 250 CU LUG NRWTNGE 1

54814BENP

CK 54814BENP 54814BE NICKEL PLAT

54859BEPHBS0412

CK 54859BEPHBS0412 54859BE PEEP

54261UB0410

CK 54261UB0410 54261 90 DEG BND

54866BEBTB

CK 54866BEBTB 54868BE BLANK TONG

54283BEBTSP

CK 54283BEBTSP 54283 BLIND END B

54868BEPHBS

CK 54868BEPHBS 54868BE PEEP HOLE

54857DBL0616

CK 54857DBL0616 54857BE CANOE LU

54816BEUFPH

CK 54816BEUFPH 54816BE 45 DEG BN

54915BEUF12SP

CK 54915BEUF12SP 54915BE 45 DEG

256-30695-940

CK 25630695940 CU TP 1HL LUG 90D

256-30695-928

CK 25630695928 CU 1HL LUG SHRT 9

54809BENT

CK 54809BENT 54809BE NARROW TONG

54819BENP

CK 54819BENP 54819BE NICKEL PLAT

58163BE

CK 58163BE 58163 BLIND END

54872BE0824B

CK 54872BE0824B 54872BE 1/2 BOLT

About Ring Connectors

The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.

Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.

Ring Connectors

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Panel grounding points

Panel grounding points

Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.

Equipment power wiring

Equipment power wiring

For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.

Crimp inspection

Crimp inspection

In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.

Ring Connectors inspection

Ring Connectors inspection

For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.

11836 configuration vs. 11582 configuration

Compare the interfaces, construction and selection details of these two product options.

11836 configuration

Example: 11836

  • Terminal Type Circular
  • Stud/Tab Size 1/2 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Color Yellow

11582 configuration

Example: 11582

  • Terminal Type Circular
  • Stud/Tab Size 1/4 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Features Brazed Seam

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Ring Connectors include?

This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.

Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.

For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.

11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details