icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
54289PFNM

CK 54289PFNM 54289 PLAIN FINISH

54872BEUB0616PH

CK 54872BEUB0616PH 350 CU LUG LN

54872BESP

CK 54872BESP 350 CU LUG LNGBRL 2

54817BEUF

CK 54817BEUF 54817BE 45 DEGREE B

54816BE0524

CK 54816BE0524 54816BE 5/16 BOLT

54211BE0628LP

CK 54211BE0628LP 54211 BLIND END

54115PFNM

CK 54115PFNM 54115 PLAIN FINISH

54820BEPH

CK 54820BEPH 54820BE WITH PEEP H

54168UBB

CK 54168UBB 54168 90 DEGREE BEND

54855BEUF0416PH

CK 54855BEUF0416PH 54855BE 45 DE

54876BENT0628

CK 54876BENT0628 54876BE NARROW

58184UB

CK 58184UB 646 CU STD.BRL. 1 HOL

54210UF0412

CK 54210UF0412 CU TP 2HL LUG 45D

54876BEUBBT

CK 54876BEUBBT 54876BE 90 DEG BE

54110NT

CK 54110NT 54110 NARROW TONGUE

PV2-10RX-T

CONN RING FLAT 2AWG #10 CRIMP

PV2-14RX-T

CONN RING FLAT 2AWG #1/4 CRIMP

PV2-12R-T

CONN RING FLAT 2AWG #1/2 CRIMP

PV2-14R-X

CONN RING FLAT 2AWG #1/4 CRIMP

PV2-12RX-T

CONN RING FLAT 2AWG #1/2 CRIMP

PV18-6RX-M

CONN RING CIRC 18-22AWG #6 CRIMP

54209T

CK 54209T CU TP 2HL LUG TOPSTACK

PV2-12RX-X

CONN RING FLAT 2AWG #1/2 CRIMP

54860BE0828LP

CK 54860BE0828LP 54860BE_1/2 BOL

About Ring Connectors

The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.

Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.

Ring Connectors

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Panel grounding points

Panel grounding points

Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.

Equipment power wiring

Equipment power wiring

For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.

Crimp inspection

Crimp inspection

In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.

Ring Connectors inspection

Ring Connectors inspection

For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.

11836 configuration vs. 11582 configuration

Compare the interfaces, construction and selection details of these two product options.

11836 configuration

Example: 11836

  • Terminal Type Circular
  • Stud/Tab Size 1/2 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Color Yellow

11582 configuration

Example: 11582

  • Terminal Type Circular
  • Stud/Tab Size 1/4 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Features Brazed Seam

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Ring Connectors include?

This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.

Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.

For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.

11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details