icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
54852BE0316PH

CK 54852BE0316PH 54852BE #10 STU

54850DBL

CK 54850DBL 54850BE CANOE LUG BA

54142LP

CK 54142LP 54142-TB LEAD PLATED

54823BEUF

CK 54823BEUF 500MCM CU LUG 2 HOL

54143UFB

CK 54143UFB 54143 45 DEG. BOTTOM

54823BEUB

CK 54823BEUB 500 CU LUG LNGBRL 2

54824BENTPH

CK 54824BENTPH 54824BE NARROW TO

54147BELP

CK 54147BELP 54147 BLIND END LEA

54824BE0628T

CK 54824BE0628T CU 2HL LUG STNDB

54859BEPF

CK 54859BEPF 54859BE PLAIN FINIS

54183T

CK 54183T 350 LUG STD BARL 5/8 M

54858BEUB0416

CK 54858BEUB0416 #2 CU LUG LNG B

54876BEBPH

CK 54876BEBPH 54876BE BOTTOM STC

54183UF12SP

CK 54183UF12SP 54183 45 DEG BND

54854BEBS

CK 54854BEBS 54854BE BELL SHAPED

54168T

CK 54168T 54168 TOP STACKING LUG

54204UB0312

CK 54204UB0312 54204 90 DEG BND

54862BEPHBS

CK 54862BEPHBS 54862BE PEEP HOLE

54854BE0616T

CK 54854BE0616T 54854BE 3/8 BOLT

54852BEUB0828

CK 54852BEUB0828 54852BE 90DEG 1

54855BE3BS

CK 54855BE3BS #3 BELLED LUG 1/4

54852BEB

CK 54852BEB CU TP 2HL LUG BOTSTA

701-1859

RING TONGUE TERMINAL 8 AWG #8

54172UF

CK 54172UF 250 CU STD BRL.1HOLE

About Ring Connectors

The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.

Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.

Ring Connectors

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Panel grounding points

Panel grounding points

Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.

Equipment power wiring

Equipment power wiring

For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.

Crimp inspection

Crimp inspection

In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.

Ring Connectors inspection

Ring Connectors inspection

For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.

11836 configuration vs. 11582 configuration

Compare the interfaces, construction and selection details of these two product options.

11836 configuration

Example: 11836

  • Terminal Type Circular
  • Stud/Tab Size 1/2 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Color Yellow

11582 configuration

Example: 11582

  • Terminal Type Circular
  • Stud/Tab Size 1/4 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Features Brazed Seam

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Ring Connectors include?

This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.

Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.

For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.

11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details