icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
54905BEUB05NP

CK 54905BEUB05NP 54904BE 90 DEG

54910BEUBBT

CK 54910BEUBBT LONG BARR BLIND E

54270B

CK 54270B 54270 BOTTOM STACK LUG

54906BEBS

CK 54906BEBS 54906BE BELL SHAPED

54260PFNM

CK 54260PFNM 54260 PLAIN FINISH

54910BEBT

CK 54910BEBT BLANK TNG LUG MOD

54261UB

CK 54261UB 54261 90 DEGREE BEND

54908BENP

CK 54908BENP 54908BE NICKEL PLAT

54261UF0410

CK 54261UF0410 54261 45 DEG BND

54905BE05LP

CK 54905BE05LP 54905BE 5/16 BOLT

54880BEUF0616PH

CK 54880BEUF0616PH 750MCM CU LUG

54266UF0410BS

CK 54266UF0410BS 54266 45 DEG 1/

54882BEUB

CK 54882BEUB 1000CU LUG LNG BRL

54270BELP

CK 54270BELP 54270 BLIND END LEA

54905BEB

CK 54905BEB CU TP 1HL LUG BOTSTA

542610410BS

CK 542610410BS 54261 1/4 BLT 5/8

54266NT0510

CK 54266NT0510 54266 NARROW 5/16

54255UF0412

CK 54255UF0412 1/0 CU LUG LNGBRL

54228BTSP

CK 54228BTSP 54228 BLANK TONGUE

54880BE0416BS

CK 54880BE0416BS 54880BE 1/4 ON

54880BEUFB

CK 54880BEUFB 54880BE 45 DEGREE

54880BE535BSPH

CK 54880BE535BSPH 54880 BELL SHA

54905BE05NP

CK 54905BE05NP 54905BE 5/16 BLT

54880BE0632BS

CK 54880BE0632BS 54880BE 3/8 ON

About Ring Connectors

The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.

Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.

Ring Connectors

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Panel grounding points

Panel grounding points

Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.

Equipment power wiring

Equipment power wiring

For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.

Crimp inspection

Crimp inspection

In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.

Ring Connectors inspection

Ring Connectors inspection

For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.

11836 configuration vs. 11582 configuration

Compare the interfaces, construction and selection details of these two product options.

11836 configuration

Example: 11836

  • Terminal Type Circular
  • Stud/Tab Size 1/2 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Color Yellow

11582 configuration

Example: 11582

  • Terminal Type Circular
  • Stud/Tab Size 1/4 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Features Brazed Seam

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Ring Connectors include?

This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.

Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.

For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.

11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details