icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
54921BE06

CK 54921BE06 54921BE 3/8 BOLT

54872BE0824T

CK 54872BE0824T 54872BE 1/2 BOLT

54868BEUB0620

CK 54868BEUB0620 CU TP 2HL LUG 9

54208UB0416

CK 54208UB0416 54208 90 DEG BND

54208I

CK 54208I 54208 INSULATED BARREL

54870BET

CK 54870BET 54870BE TOP STACKING

542070828B

CK 542070828B #2 COPPER LUG BOTT

54208UF0416

CK 54208UF0416 54208_45 DEG 1/4

58984BEUF08

CK 58984BEUF08 58984BE 45 DEG BE

54870BEUFPH

CK 54870BEUFPH 54870BE 45 DEGREE

54868BENT0514

CK 54868BENT0514 54868BE NARROW

54870BEBBS

CK 54870BEBBS 54870BE BOTTOM BEL

54208UF0828

CK 54208UF0828 54208 45 DEG 1/2

542070616T

CK 542070616T CU TP 2HL LUG TOPS

58826BEBTPH

CK 58826BEBTPH LUG L. BRL 2 HOLE

54208UB0828

CK 54208UB0828 54208 90 DEG BEND

58984BEUB

CK 58984BEUB CU LUG 646 COND 1 H

54868BE0616PHBS

CK 54868BE0616PHBS 54868BE 3/8 O

54868BE0416BS

CK 54868BE0416BS 54868BE 1/4 ON

54868BE0825

CK 54868BE0825 54868BE 1/2 BLT O

54866BEPHBS

CK 54866BEPHBS 54866BE PEEP HOLE

58826BELP

CK 58826BELP 58826BE LEAD PLATED

54906BEUB06

CK 54906BEUB06 54906BE 90 DEG BN

54909BE05

CK 54909BE05 54909BE WITH 5/16 B

About Ring Connectors

The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.

Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.

Ring Connectors

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Panel grounding points

Panel grounding points

Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.

Equipment power wiring

Equipment power wiring

For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.

Crimp inspection

Crimp inspection

In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.

Ring Connectors inspection

Ring Connectors inspection

For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.

11836 configuration vs. 11582 configuration

Compare the interfaces, construction and selection details of these two product options.

11836 configuration

Example: 11836

  • Terminal Type Circular
  • Stud/Tab Size 1/2 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Color Yellow

11582 configuration

Example: 11582

  • Terminal Type Circular
  • Stud/Tab Size 1/4 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Features Brazed Seam

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Ring Connectors include?

This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.

Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.

For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.

11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details