Panel grounding points
Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.
Explore products in this family. Open a product for details, or send us your drawing for a custom build.
| Part number | Description |
|---|---|
| 54918BEUB06PH | CK 54918BEUB06PH 54918BE 90 DEG |
| 54916BENTM12 | CK 54916BENTM12 54916BE NARROW T |
| 54919BEUB14 | CK 54919BEUB14 54919BE 90 DEG BN |
| 940307010 | RING TONGUE TERM BRS TIN 6.5D 10 |
| MS25036-114 | RING TONGUE TERMINAL |
| 256-30695-540 | CK 25630695540 CU SP 1HL LUG SHR |
| 58177UB06 | CK 58177UB06 400FLX CU LUG STDBR |
| MS25036-115-CLASS-2 | RING TERMINAL |
| MS25036-116-CLASS-2 | RING TERMINAL 1/4 STUD 8 AWG NYL |
| 58174UB10SP | CK 58174UB10SP 58174 90 DEG BND |
| MS25036-104 | TERMINAL |
| MS25036-122-CLASS-2 | MS25036-122-CLASS-2 |
| MS25036-121-CLASS-2 | MS25036-121-CLASS-2 |
| 58174UF14 | CK 58174UF14 58174 45 DEGREE BEN |
| 58163NTT | CK 58163NTT 58163 NARROW TONGUE |
| 58174UB05 | CK 58174UB05 350 WELD STD BRL 1 |
| 58165BSP | CK 58165BSP 58165 BOTTOM STACK S |
| 256306951158BT | CK 256306951158BT 256-30695-1158 |
| 256-30695-945 | CK 25630695945 CU 1HL LUG SHRT 9 |
| 54915BENTM10 | CK 54915BENTM10 54915BE NARROW T |
| 54917BEBT | CK 54917BEBT 54917BE BLANK TONGU |
| 54916BE04 | CK 54916BE04 54916BE 1/4 BOLT |
| 54918BE06PFNM | CK 54918BE06PFNM 54918BE 3/8 BOL |
| 54917BESP | CK 54917BESP 54917BE SILVER PLAT |
The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.
Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.
Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.
Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.
Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.
For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.
In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.
For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.
Compare the interfaces, construction and selection details of these two product options.
Example: 11836
Example: 11582
The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.
Practical answers to help you prepare your drawing and specifications.
This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.
Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.
For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.
Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.
Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.
11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.
Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.
Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details