icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
54915BE06B

CK 54915BE06B 54915BE 3/8 BOTTOM

54914BEUF12SP

CK 54914BEUF12SP 54914BE 45 DEG

54915BE10T

CK 54915BE10T 54915BE 5/8 INCH B

54915BEM16BS

CK 54915BEM16BS 54915BE WITH 16M

54283BTSP

CK 54283BTSP CU SP BLNK TNGE LUG

54913BEUBSP

CK 54913BEUBSP 54913BE 90 DEG SI

54915BENT

CK 54915BENT 350 LUG NARROW TONG

54913BEUFB

CK 54913BEUFB L. BRL/1 HOLE/BLIN

54914BEUB12SP

CK 54914BEUB12SP 54914BE 90 DEG

54914BE12SP

CK 54914BE12SP 54914BE 3/4 BOLT

54910BENTM10

CK 54910BENTM10 54910BE NARROW T

54913BEUB10BS

CK 54913BEUB10BS 54913BE 90 DEG

54275UF

CK 54275UF 54275 45 DEGREE BEND

54913BE10BS

CK 54913BE10BS 54913BE 5/8 BLT B

54913BENT

CK 54913BENT 54913BE NARROW TONG

54910BENP

CK 54910BENP 54910BE NICKEL PLAT

54914BEUB06PH

CK 54914BEUB06PH 54914BE 90 DEG.

54910BEUB04

CK 54910BEUB04 LONG BAR 1 HOLE B

54280UB

CK 54280UB CU 2 HOLE LUG 300MCM

54275PFNM

CK 54275PFNM 54275 PLAIN FINISH

54275NT

CK 54275NT 54275 NARROW TONGUE

54266UF

CK 54266UF 54266 45 DEGREE BEND

S1024SP

RING TERM NON-INS 16-14 AWG #8

54921BEPH

54921BEPH

About Ring Connectors

The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.

Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.

Ring Connectors

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Panel grounding points

Panel grounding points

Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.

Equipment power wiring

Equipment power wiring

For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.

Crimp inspection

Crimp inspection

In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.

Ring Connectors inspection

Ring Connectors inspection

For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.

11836 configuration vs. 11582 configuration

Compare the interfaces, construction and selection details of these two product options.

11836 configuration

Example: 11836

  • Terminal Type Circular
  • Stud/Tab Size 1/2 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Color Yellow

11582 configuration

Example: 11582

  • Terminal Type Circular
  • Stud/Tab Size 1/4 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Features Brazed Seam

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Ring Connectors include?

This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.

Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.

For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.

11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details