icon ISO 9001 · ISO 13485 · IATF 16949 · ISO 14001 certified manufacturer

Products

Explore products in this family. Open a product for details, or send us your drawing for a custom build.

Part number Description
54879NT

CK 54879NT CU TP 2HL LUG LNGBRL

54904BEUF

CK 54904BEUF LONG BRL/1 HOLE/BLI

54880BE0820

CK 54880BE0820 54880BE 1/2 BOLTS

54879BEBT

CK 54879BEBT 54879BE BLANK TONGU

54228UB

CK 54228UB 54228 90 DEGREE BEND

54872BEUF0616

CK 54872BEUF0616 54872BE 45 DEG.

54880BE0825

CK 54880BE0825 54880BE 1/2 BOLTS

54880BEUB0616PH

CK 54880BEUB0616PH 750 CU LUG LN

54878BE0816

CK 54878BE0816 54878BE W/ 1/2IN

542550416BS

CK 542550416BS 54255 1/4 BLTS 1

54224UF

CK 54224UF CU LUG 800MCM 2 HOLE

54878BE0824PH

CK 54878BE0824PH 54878BE 1/2 BOL

542110610BS

CK 542110610BS 54211 3/8 ON 5/8

54876BEUFPH

CK 54876BEUFPH 54876BE 45 DEGREE

54879BE1028

CK 54879BE1028 54879BE 5/8 BOLTS

54216BTSP

CK 54216BTSP CU SP BLNK TNGE LUG

54876BEUFBT

CK 54876BEUFBT 54876BE 45 DEG BE

54209UBBT

CK 54209UBBT 54209 90DEG BEND BL

54209B

CK 54209B CU TP 2HL LUG BOTSTACK

54223UBNT0616

CK 54223UBNT0616 54223 90 DEG NA

542100610BS

CK 542100610BS 54210 3/8 ON 5/8

54878BENT

CK 54878BENT 54878BE NARROW TONG

54868BE0825PH

CK 54868BE0825PH 54868BE 1/2 ON

54158UBSP

CK 54158UBSP 54158 90 DEG BEND S

About Ring Connectors

The Ring Connectors range covers stud-mounted wire terminations with a closed ring tongue.

Compare stud size, conductor area, crimp barrel and insulation for the required installation. Use the exact mating part and installation dimensions specified for the selected item.

Review Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the individual product page before choosing a part.

Ring Connectors

Typical Applications

Potential uses vary by part number. Check the listed specifications and equipment requirements before selecting a product.

Panel grounding points

Panel grounding points

Ring Connectors can be evaluated for panel grounding points. Match stud size, conductor area, crimp barrel and insulation to the equipment interface.

Equipment power wiring

Equipment power wiring

For equipment power wiring, verify Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge on the selected Ring Connectors. Use the exact mating part and installation dimensions specified for the selected item.

Crimp inspection

Crimp inspection

In crimp inspection, allow for the required mounting, routing or termination space. Check stud size, conductor area, crimp barrel and insulation before assembly.

Ring Connectors inspection

Ring Connectors inspection

For ring connectors inspection, identify the original Ring Connectors part number and mating arrangement. Compare Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge before substitution.

11836 configuration vs. 11582 configuration

Compare the interfaces, construction and selection details of these two product options.

11836 configuration

Example: 11836

  • Terminal Type Circular
  • Stud/Tab Size 1/2 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Color Yellow

11582 configuration

Example: 11582

  • Terminal Type Circular
  • Stud/Tab Size 1/4 Stud
  • Mounting Type Free Hanging (In-Line)
  • Termination Crimp
  • Wire Gauge 10-12 AWG
  • Insulation Insulated with Heat Shrink
  • Features Brazed Seam

The comparison describes common construction differences; final suitability depends on your electrical, mechanical and lifetime requirements.

Frequently Asked Questions

Practical answers to help you prepare your drawing and specifications.

What does Ring Connectors include?

This category covers stud-mounted wire terminations with a closed ring tongue. Use the exact mating part and installation dimensions specified for the selected item.

Examples in this category include Circular and Flat Sided, Tubular (Battery Lugs). Match the selected Ring Connectors to the required stud size, conductor area, crimp barrel and insulation.

For Ring Connectors, check Terminal Type, Stud/Tab Size, Mounting Type, Termination and Wire Gauge against the equipment or mating-part drawing. Confirm the installed clearance and termination access as well as the nominal interface size.

Check stud size, conductor area, crimp barrel and insulation for the selected part. Use its stated operating conditions and complete assembly requirements; appearance alone does not establish the electrical or environmental rating.

Use the exact mating part and installation dimensions specified for the selected item. For Ring Connectors, identify the matching system and required assembly parts before ordering.

11836 specifies Terminal Type: Circular and Stud/Tab Size: 1/2 Stud. 11582 specifies Terminal Type: Circular and Stud/Tab Size: 1/4 Stud. Check the full mating and installation requirements before treating different Ring Connectors as replacements.

Send the manufacturer and full part number, quantity and required delivery destination. For this category, include stud size, conductor area, crimp barrel and insulation and a mating or installation drawing when a replacement is needed.

Tell us what you need to build

Send a drawing, a BOM, a part number or just one sentence. Our engineers review every enquiry and reply within 24 hours.

  • Engineering review within 24 hours
  • NDA available before drawings are shared
  • Free samples in 5-7 days after drawing approval
Inquiry Drawer

Review & Submit Request

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.more details